Datasheet

ManualsBrandsTE CONNECTIVITY ManualsCrimp ConnectorsRing terminal Cross section (max.)=6.6 mm² Hole Ø=4.17 mm Partially insulated Yellow 1 pc(s)

114- 2157

Rev G2 of 14

Figure 1 (End)

Window

Opaque Insulation

Wire Barrel

Copper

Sleeve

Transparent Insulation Window

End Cap

Insulation

Butt Splice

2. REFERENCE MATERIAL

2.1. Revision Summary

Revisions to this application specification include:

S Changed company logo

2.2. Customer Assistance

Reference Product Base Part Number 51864 and Product Code 3022 are representative of PIDG terminals,

splices, and end caps. Use of these numbers will identify the product line and expedite your inquiries through a

service network established to help you obtain product and tooling information. Such information can be

obtained through a local Representative or , after purchase, by calling PRODUCT INFORMATION at the

number at the bottom of page 1.

2.3. Drawings

Customer Drawings for product part numbers are available from the service network. If there is a conflict

between the information contained in the Customer Drawings and this specification or with any other technical

documentation supplied, call PRODUCT INFORMATION at the number at the bottom of page 1.

2.4. Specifications

Product Specification 108--11023 provides test and performance results for insulated terminals and splices for

Class 1 E Nuclear applications.

2.5. Instructional Material

Instruction Sheets (408--series) provide product assembly instructions or tooling setup and operation

procedures and Customer Manuals (409--series) provide machine setup and operation procedures. Documents

available which pertain to this product are:

408--1261 Hand Crimping Tools 59239--4 and 59287--2

408--1559 Hand Crimping Tools 46121, 47386, and 47387

408--1610 “T”--Head Crimping Tools 59250 and 59275

408--1632 Terminal and Splice Crimping Dies 69344, 47806--2, 47807--1, 47808--5, and 47808--6

408--2095 Hand Crimping Tool 69710--1

408--2423 Crimping Die Assemblies for Tape--Mounted PIDG Terminals and Splices

408--2498 Crimping Head Cross Reference for Pneumatic Tools

408--2822 Crimping Die Assemblies 59826--1, 59827--1, and 59828--1

408--2823 TETRA--CRIMP* Hand Crimping Tool 59824--1

408--3295 Preparing (Reel--Wrap) Reel of Contacts for Applicator Tooling

408--4099 Pneumatic TETRA--CRIMP Adapter 679305--1

408--4105 Straight Action Crimper 217200--[ ]

408--7424 Checking Terminal Crimp Height or Gaging Die Closure

408--8044 Miniature Quick--Change Applicator for Tape--Mounted Closed Barrel Terminals

408--8053 Miniature Quick--Change Applicators