AMP Dynamic Series Connectors D-3000 Series (Wire-to-Board, Wire-to-Panel and Wire-to-Wire) List of Products by Application Tab Housing Used for both signal circuit and power/power supply circuit applications. D-3000 Series Able to carry 15A max. of current per position and are available in a full range of connector configurations including wire-to-wire, panel-mounting, free hanging, and horizontal and vertical wire-to-board mounting.
AMP Dynamic Series Connectors D-3000 Series (Continued) List of Products by Application (Continued) D-3200S High Pressure 1-Row Type Can be used in rack-and-panel application. D-3200M High Pressure Modular Type D-3200S Drawer Type D-3200M Board-Mounting Vertical Type D-3000 Series Fit for high-voltage circuits.
AMP Dynamic Series Connectors D-3000 Series (Continued) Performance Specifications Pitch Item Voltage Rating 150mil (3.81mm) 200mil (5.08mm) 250 V 600 V* Generally, the current value of connector is shown as per position. The current rating of this product is 15A as shown in the table. Note that in all circumstances it is the value per position. As the number of positions increases, this value decreases. This decrease can be calculated from the table and the current curve shown in the graph below.
AMP Dynamic Series Connectors D-3000 Series (Continued) Performance Specifications (Continued) Specifications and Instruction Sheets Specifications and Instruction Sheets Product Specification Testing Report Application Specification Instruction Sheet-Extraction Tool Instruction SheetHand Tools Instruction Sheet-Manual Tools 108-5349 501-5013 114-5148 411-5726 IS No. D-3000 Series Tool No.
AMP Dynamic Series Connectors D-3000 Series (Continued) D-3 Contact and Application Tooling Crimp Type Receptacle Contact (Used on Receptacle Housing) D-3000 Series Wire Range AWG Tab Contact (Used on Tab Housing) Contact Part Number1 Wire Wire Ins. Range Receptacle Contact 28 0.08 0.12 24 0.20 1.0~1.4 1.2~1.6 24 0.20 22 0.30 20 0.50 20 0.50 18 0.85 16 1.25 16 1.25 14 2.20 0.8~1.2 1.7~2.6 1.8~2.8 16 1.25 3.1~3.3 14 2.20 3.3~3.
AMP Dynamic Series Connectors D-3000 Series (Continued) Application Tooling (Continued) Crimping Range A, B, and C are for explanation purposes only and are not marked on the tool body. Hand Tool This hand tool is designed to be capable of handling most Factory Automation (FA) related crimping operations by a single tool in order to simplify harness fabrications suited to the specific needs of FA market. The equipment forming the nucleus of the FA system includes PCs, CNCs, servodrivers and servomotors.
AMP Dynamic Series Connectors D-3000 Series (Continued) Application Tooling (Continued) AMP-3K/40 and AMP-5K/40 Terminating Machines Mini-Applicator Minimum Quantity : 1 The AMP-3K/40 and AMP-5K/40 Terminators are designed for customers that require the increased output and quality of a semiautomatic machine at a competitive price.
AMP Dynamic Series Connectors D-3000 Series (Continued) Application Tooling (Continued) Extraction Tool This tool is used to extract contacts from wire-type tab/receptacle housings. ➁ The Extraction Tool tip lifts up housing lance, making contact free. Part Number: 234168-1 (411-5726) D-3000 Series ➀ Insert Extraction Tool into the narrow section of the upper convex cavity of housing in the direction as shown (Make sure the Tool's top and bottom are in correct position.
AMP Dynamic Series Connectors D-3000 Series (Continued) Connector Mounting Hardware L Fittings Used to secure free-hanging type tab housings onto panels. Applicable housings are specified in the table of housings. Part Number: 900121-2 (S) D-3000 Series External Dimensions The location where housing is attached varies by Series and size. Check with sample. Part Number: 900121-2 (S) Push Rivets Used to secure panel-type tab housings onto panels (Use as handy mounting hardware.
AMP Dynamic Series Connectors D-3000 Series (Continued) D-3100S — Standard 1-Row Type Appearance Board mounting pitch: Horizontal Type 150 mils (3.81mm) / Vertical Type 150 mils (3.
AMP Dynamic Series Connectors D-3000 Series (Continued) D-3100S — Standard 1-Row Type (Continued) Keying This product (D-3100S) is provided with keying plugs to help prevent misinsertion of contacts. Two types are available: X Type and Y Type (Shown below is the mating front of Tab Header). Key Rib Key Rib D-3000 Series X Keying Mark X Type Y Keying Mark Y Type Applications Typical Applications for Elevator 44 Catalog 1242132 Revised 5-07 www.tycoelectronics.
AMP Dynamic Series Connectors D-3000 Series (Continued) D-3100S — Standard 1-Row Type (Continued) Mating Dimensions Panel/Free-Hanging Type 2 3 4 5 6 8 10 Part Number — ❏-178288-3 ❏-178288-4 ❏-178288-5 ❏-178288-6 ❏-178288-7 ❏-178288-8 D-3000 Series Mating Tab Connector Part Number: ❏-178802-❏ ❏-178313-❏ ❏-177648-❏ thru ❏-178293-❏ ❏-178318-❏ thru ❏-178298-❏ Receptacle Housing No. of Pos. Horizontal/Vertical Type Dimensions A B — — 26.76 30.57 34.38 38.19 45.81 53.43 16.70 20.51 24.32 28.13 35.
AMP Dynamic Series Connectors D-3000 Series (Continued) D-3100S — Standard 1-Row Type (Continued) Board-mounting Tab Header (Horizontal Type) D-3000 Series Mating Receptacle Housing Part Number: ❏-178288-❏ PC Board Layout Acceptable Board Thickness: 1.6-2.4±0.1 No. of Pos. 2 3 4 5 6 8 10 — A — Dimensions B — C — ❏-178293-❏ ❏-178294-❏ ❏-178295-❏ ❏-178296-❏ ❏-178297-❏ ❏-178298-❏ 21.62 25.43 29.24 33.05 40.67 48.29 15.24 19.05 22.86 26.67 34.29 41.91 07.62 11.43 15.24 19.05 26.67 34.
AMP Dynamic Series Connectors D-3000 Series (Continued) D-3100S — Standard SMT Type Appearance Dielectric Withstanding Voltage: 1,500 V (for one minute) Voltage Rating: 250 V Receptacle Housing Board-mounting Tab Header (Horizontal Type) (Vertical Type) D-3000 Series Part Number Chart No. of Pos. Keying Receptacle Housing* 3 5 8 x x x 1-178288-3 1-178288-5 1-178288-7 Board-mounting Tab Header Horizontal Type Vertical Type — — 1-177662-❏ 1-179188-❏ 1-177665-❏ — Material of Tab Header : P.P.
AMP Dynamic Series Connectors D-3000 Series (Continued) D-3100S — Standard SMT Type (Continued) Board-mounting Tab Header (Horizontal Type) D-3000 Series Mating Receptacle Housing Part Number: ❏-178288-❏ PC Board Layout Tube Package Dimensions (Ref.) No. of Pos. 3 5 8 Part Number Dimensions — A — B — C — D — ❏-177662-❏ ❏-179188-❏ 29.24 40.67 22.86 34.29 15.24 26.67 22.24 33.
AMP Dynamic Series Connectors D-3000 Series (Continued) D-3100D — Standard 2-Row Type Appearance Board mounting pitch: Horizontal Type 150x150mils (3.81x3.81mm) / Vertical Type 150x200mils (3.81x5.
AMP Dynamic Series Connectors D-3000 Series (Continued) D-3100D — Standard 2-Row Type (Continued) Mating Dimensions Panel/Free-Hanging Type D-3000 Series Receptacle Housing Horizontal/Vertical Type Mating Tab Connector Part Number: ❏-178803-❏ 1717412-❏ ❏-178964-❏ 178323-❏ thru ❏-178303-❏ thru 178328-❏ ❏-178308-❏ No. of Pos. Receptacle Housing 6 8 10 12 16 20 178289-3 178289-4 178289-5 178289-6 178289-7 178289-8 Dimensions A B 24.36 16.70 28.17 20.51 31.98 24.32 35.09 28.35 42.71 35.97 51.03 43.
AMP Dynamic Series Connectors D-3000 Series (Continued) D-3100D — Standard 2-Row Type (Continued) Board-mounting Tab Header (Horizontal Type) Mating Receptacle Housing Part Number: 178289-❏ D-3000 Series PC Board Layout Acceptable Board Thickness: 1.6-2.4±0.1 Solder tine section is 0.64 sq. No. of Pos. Part Number 6 8 10 12 16 20 178303-❏ 1717412-❏ 178305-❏ 178306-❏ 178307-❏ 178308-❏ Dimensions B 15.24 19.05 22.86 26.67 34.29 41.91 A 21.62 25.43 29.24 33.05 40.67 48.
AMP Dynamic Series Connectors D-3000 Series (Continued) D-3100M — Modular Type Appearance Connectors can be used in modular configurations in combination with D-3100S. Ideally Suited For Allocation of Signal Circuits Board mounting pitch: Horizontal Type 150x150mils (3.81x3.81mm) / Vertical Type 150x300mils (3.81x7.
AMP Dynamic Series Connectors D-3000 Series (Continued) D-3100M — Modular Type (Continued) Keying This product (D-3100M) is provided with keying to help prevent mismating of connector halves. Keying is available in three types – XX Type, YY Type and XY Type. (Shown below is the mating surface of Tab Header.
AMP Dynamic Series Connectors D-3000 Series (Continued) D-3100M — Modular Type (Continued) Mating Dimensions 17.0 32.4 Horizontal Type (Modular Use) Vertical Type 21.6 28.1 18.5 18.5 21.6 28.1 32.4 25.9 25.9 D-3000 Series 17.0 (Modular Use) Receptacle Housing Mating Tab Header Part Number: ❏-178137-❏ ❏-178141-❏ No. of Pos. Part Number 6 ❏-178127-6 Dimensions A B 24.76 16.
AMP Dynamic Series Connectors D-3000 Series (Continued) D-3100M — Modular Type (Continued) Board-mounting Tab Header (Horizontal Type) Mating Receptacle Housing Part Number: ❏-178127-❏ D-3000 Series PC Board Layout Acceptable Board Thickness: 1.6-2.4±0.1 Tube Package Dimensions (Ref.) No. of Pos. Part Number 6 ❏-178137-❏ A 21.62 Dimensions B 15.24 C 7.62 Board-mounting Tab Header ( Vertical Type) Mating Receptacle Housing Part Number: ❏-178127-❏ PC Board Layout Acceptable Board Thickness: 1.
