Datasheet

ManualsBrandsTE CONNECTIVITY ManualsPCB ConnectorsStrain relief Total number of pins: 40 1 pc(s)

Qualification Test

Report

501-45

13Dec10 Rev B

Connector, Flat Cable Round Conductor, AMP-LATCH*

Novo Receptacles|

Berwyn, PA

* Trademark

| Indicates change

1 of 8

LOC B

1. INTRODUCTION

1.1. Purpose

Testing was performed on AMP-LATCH* Novo Receptacles to determine their conformance to the|

requirements of Product Specification 108-40000 Revision C.|

1.2. Scope

This report covers the electrical, mechanical, and environmental performance of the AMP-LATCH Novo|

Receptacles. Testing was performed at the Harrisburg Electrical Components Test Laboratory between

02Dec90 and 06Jun91. The test file number for this testing is CTL5730-115-016. Additional testing on|

alternate plating was performed between 09Sep08 and 31Oct08. The test file number for this additional|

testing is EA20080505T. This documentation is on file at and available from the Harrisburg Electrical|

Components Test Laboratory.

1.3. Conclusion

The AMP-LATCH Novo Receptacles listed in paragraph 1.5., conformed to the electrical, mechanical,|

and environmental performance requirements of Product Specification 108-40000 Revision C.|

1.4. Product Description

AMP-LATCH Novo receptacles are designed to crimp to .050 inch centerline ribbon cable, wire sizes|

30, 28 and 26 solid and 28 and 26 stranded) AWG. Complete assemblies mate to .025 inch square

posts on .100 inch centerline. The contacts are a copper alloy with duplex plated gold on the mating end

and tin/lead on the termination end. The housing material is black thermoplastic UL 94V-0.

Summary of content (8 pages)

PAGE 1
Qualification Test Report 13Dec10 Rev B Connector, Flat Cable Round Conductor, AMP-LATCH* Novo Receptacles | 1. INTRODUCTION 1.1. Purpose | | Testing was performed on AMP-LATCH* Novo Receptacles to determine their conformance to the requirements of Product Specification 108-40000 Revision C. 1.2. | Scope This report covers the electrical, mechanical, and environmental performance of the AMP-LATCH Novo Receptacles.
PAGE 2
501-45 1.5. Test Specimens Test specimens were representative of normal production lots.
PAGE 3
501-45 1.7. | Qualification Test Sequence A. Test Report CTL5730-115-016 Test Or Examination Examination of product Termination resistance, dry circuit Insulation resistance Dielectric withstanding voltage Random vibration Physical shock Connector mating force Connector unmating force Durability Thermal shock Humidity/temperature cycling Mixed flowing gas Temperature life NOTE | B. See paragraph 1.5. Numbers indicate sequence in which tests are performed.
PAGE 4
501-45 | 2. SUMMARY OF TESTING 2.1. Test Report CTL5730-115-016 A. Examination of Product - All Test Groups All specimens submitted for testing were selected from normal current production lots. They were inspected and accepted by the Product Assurance Depsartment of the Capital Goods Business Unit. B. Termination Resistance, Dry Circuit - Test Groups 1, 2 and 3 All termination resistance measurements, taken at 100 milliamperes DC and 50 millivolts open circuit voltage were less than 15 milliohms.
PAGE 5
01-45 H. Connector Unmating Force - Test Group 1 All unmating force measurements were greater than 1.5 ounces per contact. I. Durability - Test Group 1 No evidence of physical damage was visible as a result of mating and unmating the specimens 75 times for 15 microinches of gold plating and 150 times for 30 microinches of gold plating. J. Thermal Shock - Test Group 4 No evidence of physical damage was visible as a result of thermal shock testing. K.
PAGE 6
501-45 | F. | No evidence of physical damage was visible as a result of thermal shock testing. | G. | Humidity/temperature Cycling - Test Group 2 No evidence of physical damage was visible as a result of humidity/temperature cycling. | H. | | Mixed Flowing Gas - Test Group 4 No evidence of physical damage was visible as a result of exposure to the pollutants of mixed flowing gas. | I.
PAGE 7
501-45 E. Random Vibration Mated specimens were subjected to a random vibration test, specified by a random vibration spectrum, with excitation frequency bounds of 50 and 2000 Hz. The Power Spectral Density (PSD) at 50 Hz was 0.01 G2/Hz. The spectrum sloped up at 6 dB per octave to a PSD of 0.04 G2/Hz at 100 Hz. The spectrum was flat at 0.04 G2/Hz from 100 to 1000 Hz. The spectrum sloped down at 6 dB per octave to the upper boundary frequency of 2000 Hz at which the PSD was 0.01 G2/Hz.
PAGE 8
501-45 | B. | | | | | | Random Vibration Mated specimens were subjected to a random vibration test, specified by a random vibration spectrum, with excitation frequency bounds of 20 and 500 Hz. The spectrum was flat at 0.02 G2/Hz from 20 to 500 Hz. The root-mean square amplitude of the excitation was 3.10 GRMS. This was performed for 15 minutes in each of 3 mutually perpendicular planes for a total vibration time of 45 minutes.