Datasheet

Datasheet Rev. IJ1
Issued 2009/10
www.tycoelectronics.com
www.schrackrelays.com
Dimensions are in mm unless
otherwise specified and are
shown for reference purposes
only.
Product specification
according to IEC 61810-1.
Product data, technical para -
me ters, test conditions and
processing information only
to be used together with the
'Definitions' section in the cat -
alogue or at schrackrelays.com
in the ‘Schrack’ section.
Specifications subject to
change.
General Purpose Relays
1
SCHRACK
Power PCB Relay RT2 bistable
n
2 pole 8 A, 2 CO contacts
n
Polarized bistable version with 1 or 2 coils
n
5 kV / 10 mm coil-contact
n
Reinforced insulation
Applications
Battery powered equipment or applications with "memory
function" (e.g. mains failure)
F0219-C
Approvals
V REG.-Nr. 6106, Z E214025, b 14385
Technical data of approved types on request
Contact data
Contact configuration 2 CO
Contact set single contact
Type of interruption micro disconnection
Rated voltage / max. switching voltage AC 250 / 400 VAC
Rated current 8 A, UL: 10 A
Limiting continuous current 8 A, UL: 10 A
Maximum breaking capacity AC 2000 VA
Limiting making capacity, max 4 s, duty factor 10% 15 A
Contact material AgNi 90/10
Rated frequency of operation with / without load 15 / 1200 min
-1
Operate- / release time max 10 / 5 ms
Bounce time NO / NC contact max 4 / 9 ms
Contact ratings
Type Contact Load Ambient Cycles
temp. [°C]
IEC 61810
RT444 NO 8 A, 250 VAC, cosϕ=1 85°C 100x10
3
RT424 CO 8 A, 250 VAC, cosϕ=1 85°C 30x10
3
UL 508
RT424 DC coil NO / NC 10 A, 250 VAC, general purpose 85°C 20x10
3
RT424 DC coil NO / NC 1/2 hp, 240 VAC 85°C 1x10
3
RT424 DC coil NO / NC Pilot duty, B300, R300 85°C 6x10
3
Coil data 1 coil 2 coils
Rated coil voltage range 5...24 VDC
Operative range to IEC 61810 2
Limiting voltage, % of rated coil voltage 120% 150%
Minimum energization duration 30 ms
Maximum energization duration 1 min at < 10% DF
Coil insulation system according UL1446 class F
Coil versions, bistable coil
Coil Rated Operate Reset Coil Rated coil
code voltage voltage voltage resistance power
VDC VDC VDC c mW
bistable, 1 coil
A05 5 3.5 2.8 62+10% 403
A06 6 4.2 3.3 90+10% 400
A12 12 8.4 6.6 360+10% 400
A24 24 16.8 13.2 1440+10% 400