Datasheet

108-40018
3.3. Ratings
! Voltage: 250 volts AC
! Current: Signal application only, 1 am pere m axim um per contact
! Tem perature: -65 to 105°C
3.4. Perform ance and Test Description
Product is designed to m eet electrical, m echanical and environm ental perform ance requirem ents
specified in Figure 1. Unless otherwise specified, all tests shall be perform ed at am bient environm ental
conditions per Test Specification 109-1.
3.5. Test Requirem ents and Procedures Summ ary
Test Description Requirem ent Procedure
Exam ination of product. Meets requirem ents of product
drawing.
Visual, dim ensional and functional
per applicable quality inspection
plan.
ELECTRICAL
Insulation resistance. 5000 megohm s m inim um initial.
1000 megohm s m inim um final.
EIA-364-21.
500 volts DC, 2 m inute hold.
Test between adjacent contacts of
unmated specim ens.
W ithstanding voltage. One minute hold with no breakdown
or flashover.
EIA-364-20, Condition I.
1000 volts AC at sea level.
Test between adjacent contacts of
unmated specim ens.
MECHANICAL
Solderability. Solderable area shall have
minimum of 95% solder coverage.
TE Spec 109-11-1.
Subject contacts to solderability for
specim ens with tin-lead plated
soldertails.
TE Spec 109-11-11.
Subject contacts to solderability for
specim ens with lead-free tin plated
soldertails.
Com ponent resistance to wave
soldering.
See Note. TE Spec 109-202, Condition A.
240°C for specim ens with tin-lead
plated soldertails.
TE Spec 109-202, Condition B.
265°C for specim ens with lead-free
tin plated soldertails.
Contact retention. Post shall not dislodge from normal
position.
EIA-364-29, Method A.
Apply axial load of 2 pounds to
contacts and hold for 6 seconds.
See Figure 3.
Figure 1 (continued)
Rev F 2 of 5