Datasheet

124
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Standard Profile Headers,
Shrouded
5
Standard Profile Headers—Shrouded, with .150 [3.81] End Dimension,
Double-Row, .100 x .100 [2.54 x 2.54] Centerline
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
Posts — Phosphor bronze, plated as
follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin on solder area, with entire post
underplated .000050 [0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin on solder area, with entire post
underplated .000050 [0.00127] nickel
Plating C — .000100-.000200
[0.00254-0.00508] tin over .000050
[0.00127] nickel on entire post
Related Product Data
Mateable Connectors
AMPMODU MTE Receptacles —
pages 232, 233, 235 (used with
coupling shroud on page 241)
AMPMODU Wire-Applied
Receptacles — pages 216-219
Technical Documents — page 276
See mating connector for applicable
product and application specifications.
C
.100*
[2.54]
.035±.003
[0.89±0.08]
Dia. Typ.
A
.157
[3.99]
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
*±.003 [±0.08] tolerances not to accumulate
within one connector pattern.
.025 [0.64] Square
Right-Angle Post
(with Detent Windows)
B
.400
[10.16]
.100
[2.54]
Ty p.
.150
[3.81]
(2 Plc.)
.135
[3.43]
.200
[5.08]
Ref.
(Contact Area)
.318
[8.08]
.090
[2.29]
(2 Plc.)
.100
[2.54]
.040
[1.02]
(3 Plc.)
.100*
[2.54]
Ty p.
.489
[12.42]
C
.080
[2.03]
E
.240
[6.10]
Ty p.
D
.639
[16.23]
.013
[0.33]
(Standoffs)
.100
[2.54]
.289
[7.34]
.280
[7.11]
No. of
Dimensions Post Plating/Part Nos.
Pos.
A B C D E Plating A Plating B Plating C
8 .680 [17.27] .600 [15.24] .300 [7.62] .190 [4.83] — 5-103167-1 5-102570-2 5-87577-1
10 .780 [19.81] .700 [17.78] .400 [10.16] .290 [7.37] — 5-103167-2 5-102570-3 5-87577-2
12 .880 [22.35] .800 [20.32] .500 [12.70] .290 [7.37] — 5-103167-3 5-102570-4 5-87577-3
14 .980 [24.89] .900 [22.86] .600 [15.24] .390 [9.91] — 5-103167-4 5-102570-5 5-87577-4
16 1.080 [27.43] 1.000 [25.40] .700 [17.78] .390 [9.91] — 5-103167-5 5-102570-6 5-87577-5
18 1.180 [29.97] 1.100 [27.94] .800 [20.32] .490 [12.45] — 5-103167-6 5-102570-7 5-87577-6
20 1.280 [32.51] 1.200 [30.48] .900 [22.86] .190 [4.83] .890 [22.61] 5-103167-7 5-102570-8 5-87577-7
22 1.380 [35.05] 1.300 [33.02] 1.000 [25.40] .190 [4.83] .990 [25.15] 5-103167-8 5-102570-9 5-87577-8
24 1.480 [37.59] 1.400 [35.56] 1.100 [27.94] .190 [4.83] 1.090 [27.69] 5-103167-9 6-102570-0 5-87577-9
26 1.580 [40.13] 1.500 [38.10] 1.200 [30.48] .190 [4.83] 1.190 [30.23] 6-103167-0 6-102570-1 6-87577-0
28 1.680 [42.67] 1.600 [40.64] 1.300 [33.02] .190 [4.83] 1.290 [32.77] 6-103167-1 6-102570-2 6-87577-1
30 1.780 [45.21] 1.700 [43.18] 1.400 [35.56] .190 [4.83] 1.390 [35.31] 6-103167-2 6-102570-3 6-87577-2