Optical LAN Solution Simplifying Enterprise Passive Optical Networks (PON) System Solution Guide EMEA
Optical LAN Solution As optical fiber moves closer to end users, rapid changes are underway in both the data center and the equipment closet. As a result, new installation and maintenance techniques are being employed within enterprise applications. Passive Optical Network (PON) applications are now being deployed. Fiber is no longer limited to just access equipment. Fiber connectivity to a single user is a reality.
Optical LAN Solution OLS By the Numbers TE's Optical LAN Solution (OLS) is the end-to-end fiber optic infrastructure used for indoor Passive Optical Networks (PONs), that takes a single strand of singlemode graded fiber from the Data Center all the way to the individual desk or end device location. This overview details some of the many features and benefits of Optical LAN Solution, highlighting the impressive numbers behind the OLS story.
Optical LAN Solution Power and Environmental Savings OLS vs. Traditional LAN Architectures • Once the equipment energy consumption is totaled, the following formula can be used to calculate cost savings for commercial power between traditional copper/fiber and OLS: –– Equipment wattage x 1.1 x 2/1000 = KW –– KW x 8760 hrs per year = KWH –– 0.
Optical LAN Solution Operational Savings OLS vs. Traditional LAN Architectures • Reduced Troubleshooting and Maintenance Costs –– Traditional copper/fiber networks require up to three sets of electronics vs.
Optical LAN Solution Cable Plant Savings Contrasting the Environmental Impact of CAT6 / CAT6A (horizontal), multimode fiber (vertical), and TE Optical LAN Solution (OLS) The environmental impact of choosing OLS over traditional structure cabling architectures can be significant. The following scenario compares the environmental impact and cable costs reduction of traditional CAT6 / CAT6A and multimode fiber versus OLS. The analysis is based on the same scenario found on page 4 using 700 users model.
Optical LAN Solution • Cable weight for 12 core multimode fiber (MMF) cables for vertical backbone up to 60 meters: 18 kg • Cable weight of horizontal cabling for 1400 CAT6 & CAT6A outlets (2 ports per user) 55 metre average run: CAT6A Shielded: 2800 kg CAT6 Unshielded: 2660 kg • Total cable weight for MMF and Shielded CAT6A: 2818 kg • Total cable weight for MMF and Unshielded CAT6: 2678 kg • Cable weight for single mode (OS2) bend insensitive fibre to support 350 ONTs (2 ports per user) – 70 metre run* -
Optical LAN Solution Architectural Design Options Just like traditional point-to-point networks, Passive Optical Networks (PON) can be varied depending upon network needs, architecture, building layout, and economics. TE offers a designer the widest variety of cabling solutions available for Passive Optical Networks. The following potential network designs are shown as guidelines for PON applications. They may be used alone, or in combination when added to the appropriate PON electronics.
Optical LAN Solution Centralized Splitting – Option 3 • Low cable usage • Easy design OLT • Central Splitting Splitter Adapter Plate page 13 Mini RDT page 14 Splitter adapter in enclosure page 13 MDF MPO Zone ONT SCAPC ONTs can also be located in a consolidation area in the IDF zone or by means of an enclosure or in-ceiling tile as shown in the images below.
MDF/IDF Optical LAN Solution UCP Patch Panel Angled and Flushmount FEATURES • 19” 1U unloaded modular patch panel with support for 4 Quick-Fit Modules • Angled and flush style panels available • Modular, rear cable management for both horizontal Copper and Fiber cables • Accepts Pre-terminated Cu or FO cassettes or Field-terminated Copper modules • Including grounding bolt Color: black (RAL 9005) ORDERING INFORMATION Description Part Number UCP Patch Panel 1U Angled 1-1671590-1 UCP Patch Panel 1U Flush
IDF Optical LAN Solution Rapid Fiber Distribution Hub (iFDH) TE‘s Rapid Fiber Distribution Hub organizes and administers optical fiber cables and passive optical splitters for enterprise PON applications. The enclosures support plug-and-play termination with a cross-connect/interconnect interface that makes installation, maintenance, and changes faster and easier. The RapidReel feeder cable speeds up installation time and conveniently stores slack inside the iFDH.
IDF Optical LAN Solution Mini Plug-and-Play Splitter Modules TE‘s Mini Plug-and-Play Splitter Modules support centralized splitting architectures. The modules are available in a wide range of split ratios. The rugged packaging is built for high performance, while the true plug-and-play design reduces installation time.
MDF/IDF Optical LAN Solution Splitter Adapter Plate The splitter adapter plate offers Passive Optical LAN designers a cost-effective method to split optical signals to multiple locations/users using traditional cabling and enclosure footprints. Reduced bend radius fiber technology enables technicians to route fiber in the cabinet in less time, saving installation costs.
IDF/Zone Optical LAN Solution Rapid Fiber Distribution Terminal TE‘s Rapid Fiber Distribution Terminal (FDT) provides a compact, NEMA-12 rated solution for connecting optical fiber cables within enterprise environments and serves as a distribution/consolidation point. It eliminates the need for splice cases and separate cable assemblies by integrating the RapidReel cable payout system.
Zone Optical LAN Solution Fiber Splitter Boxes TE’s Fiber Splitter Boxes (FSB) are mini Fiber Distribution Hubs that can be used for plug-and-play (PNP) or fusion splice applications. When used as a plug-and-play box, they are ideal for uses such as lower count floors or buildings, extra capacity requirements beyond the standard Fiber Distribution Hub (FDH), and when localized splitting or physical path redundancy (using a 2x32 split) is desired.
Zone/User Optical LAN Solution Optical Fiber Cables The TE reduced bend radius singlemode cable assemblies are used to connect the user area to the Rapid FDT or when connecting the ONT to the wall plate at the user end of the PON. With nearly 40 years of fiber cable manufacturing experience, TE offers a complete family of high performance cable and related products. SC Angled Polish SC Ultra Polish TE‘s singlemode reduced bend radius cable assemblies have a bend radius of 7.
Optical LAN Solution External Rodent Resistant Loose Tube System Cable with corrugated steel armour FEATURES • LLDPE (Linear Low Density Polyethylene) • Metallic rodent resistant (corrugated steel) • For use in ducts and in direct burial applications • Longitudinal and lateral water resistance • Central gel-filled loose tube construction • Excellent crush and impact resistance • Suitable for all termination techniques • Fiber category: OS2 • Option: ULSZH sheath for internal and external applications O
Optical LAN Solution Category 6A LSZH UTP and S/FTP Patch Cords FEATURES • Supports 10 Gigabit Ethernet to a full 100m • Exceeds the requirements of IEEE 802.
Optical LAN Solution Category 6 S/FTP Patch Cord RJ-45 LSZH FEATURES • Category 7 S/FTP stranded cable • LSZH sheath • Color-matched snagless boots • Universal B-wiring ORDERING INFORMATION Description Part Number Color: white Y-959385-X Color: gray Y-1711076-X Color: green Y-1711077-X Color: yellow Y-1711078-X Color: blue Y-1711079-X Other colors and lengths are available upon request.
Optical LAN Solution MiniPods FEATURES • External mounting points • Can be passed through standard floor grommets • Incorporated dust protection on each port • Pre-loaded with modular connectivity (including CL jacks) • 3, 4 and 6 port versions available ORDERING INFORMATION Description Part Number MiniPod Cat. 6 CL UTP 3 port 6540 1 684-03 MiniPod Cat. 6 CL UTP 4port 6540 1 678-04 MiniPod Cat.
Optical LAN Solution Wall Mount Enclosure for 6 Modules, Unloaded, with Side Door FEATURES • Accepts 6 Snap-In-Modules (Snap-In Modules) • Optional lock available (559501-2) • Optional grommets available • Splice tray holder kit available • Designed for intrabuilding or campus backbone applications • Reversible cable strain relief bracket • Recessed, easy-to-use door latches • Dimensions (for exact dimensions consult customer drawing): 16.5" (40 cm) H x 14" (35.
Optical LAN Solution Wall Mount Enclosure 2F/4F (Plastic) FEATURES • Pre-installed adapter • Size: 125 x 150 x 65 mm (W x H x D) • IP 53 rated ORDERING INFORMATION Description Part Number Wall Mount Enclosure 2F, 1 x SC Duplex, SM 1671116-2 Wall Mount Enclosure 6F/12F (Plastic) FEATURES • Pre-installed adapters • Incl.
Optical LAN Solution Universal Fiber Optic wall outlets FEATURES • Unpopulated wall outlets for all Fiber-to-the-Desk applications (Inserts to be ordered separately) Color: pure white (RAL 9010) ORDERING INFORMATION Description Part Number “45x45” Outlet 45 x 45 mm for SC-Duplex adaptor; Color: white (RAL 9010) 183931-1 DIN Outlet for SC Duplex Adaptor; Frame: No; Color: almond (RAL 1013) 966936-2 DIN Outlet for SC Duplex Adaptor; Frame: No; Color: white (RAL 9010) 2-966936-2 Fiber coupler duplex
Optical LAN Solution AMP LightCrimp Plus Connectors FEATURES • Easiest and quickest fiber termination (less than one minute) • Factory polished for consistent high quality and finish (no paper required) • No epoxy, curing or UV-light required • Complies with the relevant TIA/EIA, IEC, CECC und EN/IS standards • Durability: 500 cycles TECHNICAL DATA • Ferrule: Ceramic INSTRUCTION SHEET LIGHTCRIMP PLUS LightCrimp Plus SC; English; Part Number: 408-4471 • Attenuation typical (dB): 0.
Optical LAN Solution Video-WDM (Wavelength Division Multiplexer) When RF video is required for OLS applications, wave-length division multiplexers (WDMs) support combining the analog or digital video with the voice and data from the OLT. TE‘s WDM modules and rack mounted shelves offer a compact solution for OLS deployments.
Optical LAN Solution Dual MicroVAM Video-WDM with integrated 1x2 splitter For certain video RF applications, an additional split before the video WDM may be desired. The MicroVAM unit pictured below offers a compact solution for adding additional splits of the video signals prior to being combined at the video WDM device. The MicroVAM unit fits into a FMT MicroVAM chassis.
Optical LAN Solution The Blown Fibre system from TE Connectivity The Blown Fibre system from TE Connectivity provides a simple solution to manage evolving network demands without the need for high initial capital expenditure or extensive network planning. Blown Fibre enables optical networks to adapt to changing business requirements.
Optical LAN Solution Blown Fibre SINGLEMODE – BLOWN FIBRE UNIT Singlemode Blown Fibre Units meet the OS2 industry standard as set out in ISO/IEC 11801:2002 and is compliant to ITU-T RECOMMENDATION G.652 C/D. Ideally suited for deployment in metro area, campus and building backbone environments, singlemode blown fibre allows for maximum network design flexibility. Each blown fibre unit has an external coating of glass microspheres which assist in blowing fibres over large distances.
Optical LAN Solution Blown Tube BLOWN TUBE – INTERNAL Small diameter low friction tubes provide the dedicated pathway for the optical fibre units are integral to the TE blown fibre solution. Empty High Density Polyethylene (HDPE) tubes are available in a variety of sizes, combinations, and protective systems. The tubes have all been rigorously tested and enable the blown fibre units to be blown the optimum distance within the tube network.
Optical LAN Solution Internal Plant GAS SEAL UNIT CUSTOMER LEAD-IN UNIT The Blown Fibre Gas Seal Unit can be used at all customer entry points. A wall mounted unit, it is positioned internally at the cable entry point. Gas sealing connectors facilitate the transition of the incoming external blown fibre tubing to the internal blown fibre tubing. These connectors are used to seal both populated (with blown fibre bundle) and unpopulated blown tubing.
Optical LAN Solution PON System Guide Conclusion PON is a point-to-multipoint network architecture in which unpowered optical splitters enable one strand of singlemode optical fiber to serve multiple users with data, video and voice services through a variety of Internet protocol (IP)-enabled devices, such as computers, wireless access points (WAPs) and voice over IP (VoIP) phones.
TE ENTERPRISE NETWORKS REGIONAL SALES HEADQUARTERS: North America Greensboro, NC, USA Ph: +1-800-553-0938 Fx: +1-717-986-7406 Latin America Buenos Aires, Argentina Ph: +54-11-4733-2200 Fx: +54-11-4733-2282 EMEA Kessel-Lo, Belgium Ph: +32-16-35-1321 Fx: +32-16-35-2188 SAARC Bangalore, India Ph: +91-80-4011-5000 Fx: +91-80-4011-5030 Asia Hong Kong, China Ph: +852-2735-1628 Fx: +852-2735-1625 Pacific Sydney, Australia Ph: +61-2-8748-9500 Fx: +61-2-9748-8487 TE ENTERPRISE NETWORKS IN EUROPE, MIDDLE EAST A