Datasheet

Optical LAN Solution
30
www.te.com/enterprise-eu 01/14 109830EU
GAS SEAL UNIT
The Blown Fibre Gas Seal Unit can
be used at all customer entry points.
A wall mounted unit, it is positioned
internally at the cable entry point.
Gas sealing connectors facilitate the
transition of the incoming external
blown fibre tubing to the internal
blown fibre tubing. These connectors
are used to seal both populated (with
blown fibre bundle) and unpopulated
blown tubing. The unit is used for
internally fed cable or with a Customer
Lead-In Unit for cables entering through
the fabric of the wall.
CUSTOMER LEAD-IN UNIT
The Customer Lead In Unit enables
external Blown Tube to be passed
through the building fabric from an
outside wall and can be used to enter
any type of building whether oce,
factory or residential. The Customer
Lead-In Unit comprises two separate
units mounted either side of the wall
and connected by a length of conduit.
This product can also be used to
manage the entry of conventional cable.
INTERNAL TUBE DISTRIBUTION
UNIT
The Internal Tube Distribution Unit
(Internal TDU) has been designed to
allow maximum flexibility within building
applications. The Internal TDU accepts
a range of Indoor tube assemblies up
to 19 tube capacity. The units allow
individual tube breakout, re-routing
or gas/water sealing. The tubes are
positively managed to prevent excessive
tube bending.
INSTALLATION EQUIPMENT
The installation process for the blown
fibre units requires the use of additional
equipment items in conjunction with
the blowing head and compressor.
This range of equipment includes the
Regulator, Pan Guide, Pan Support
Frame, Fibre Inversion Pan, Pan
Inversion Ring, and Blowing Beads. The
full range of equipment is available from
TE. It is necessary for an installer to
attend the Installation Training Course
(booked through TE Connectivity UK)
prior to using this equipment.
ACCESSORIES
An integral part of the TE Blown Fibre
Solution is the tube connection and
tube sealing products. A wide range
of products is available which enable
tubes to be connected together,
sealed from water or gas ingress,
or reduced from one tube size to
another. This range of accessories is
fully compatible with the Blown Fibre
Units and Blown Fibre Tube supplied
by TE.
Internal Plant
Installation Equipment