Datasheet

Hand Tool Kits
AMP specialty hand tools are available in
convenient kits that contain the tooling,
terminations, and spare parts you need
for your crimping operations.
PRO-CRIMPER III Hand Tool PIDG and
PLASTI-GRIP Terminal Kit, Part No. 55823-1
Includes hand tool (Part No. 58433-3), 225
insulated ring and spade terminals in 12-10,
16-14 and 22-16 AWG [3.0-5.0, 1.3-2.0 and
0.3-1.3 mm
2
] wire sizes.
BNC Premises Wiring Kit, Part No. 58477-1
Includes hand tool (Part No. 58433-1);
plugs—5 RG-58, 10 RG-59/62, 5 RG-58
plenum and RG-59/62 plenum sizes;
adapters—2 jack-to-jack and 2 “T”.
Carrying Case (Empty),
Part No. 679223-1
Includes two empty storage boxes
for die sets.
PRO-CRIMPER III Hand Tool Repair Kit,
Part No. 679221-1
Includes retaining rings, handle return
spring, pawl spring, pivot pins, pawl pin,
ratchet pawl, die pins, nut and die
set screws.
Custom Crimp Dies
If you need custom crimp dies,Tyco
will design and prototype them for you.
A minimum order of 3 pieces is required.
Contact the Tooling Assistance Center at
1-800-522-6752 for more information.
Manual Wire Preparation
A full selection of manual wire strippers
complements these tools, providing a
complete solution for convenient, correct
wire termination.
Coax Stripper, Part No. 1490490-1
• 3 blades designed to strip
RG-6, RG-58, RG-59
cable in one step
• Replaceable blade
cartridges
Cyclops Cable Stripper, Part No. 1375317-1
• Outer sheath stripper
• Automatically adjusts to
different cable thicknesses
• Works on cable diameters
up to 11 mm [0.43 in]
Economy Wire Stripper and Cutter,
Part No. 1490491-1
• Strips 10-24 AWG
[5.26-0.2 mm
2
]
• Adjustable to any of
8 wire sizes
Rotary Cable Stripper, Part No. 606700-1
• Round cable tool can
be used on single- or
multiple-conductor
cable up to 44.5 mm
[1.75 in]
Automatic Wire Stripper, Part No. 734185-1
• Strips PVC,THHN, and
THHW
• Adjustable wire stop
• Built-in cutter
• Strips 10-28 AWG [5.26-0.09 mm
2
]
For drawings or technical data, contact your Tyco Electronics sales engineer or call the
Technical Support Center: 1-800-522-6752. Dimensions are in millimeters unless
specified otherwise. Values in brackets are English equivalents unless specified otherwise.
Specifications subject to change. Consult Tyco Electronics for latest specifications.
Need More Information?
For information about tooling, call 1-800-522-6752
or e-mail [e-mail].