Datasheet

Manufacturer Terminal Wire Size P/N 354940-1 SDE Die Set
with SDE Die Set Only
Sta-Kon Nylon
22-10 AWG [0.3-5.0 mm
2
] 58433-3 58423-1
and Vinyl Insulated
Terminals and Splices
T&B
Sta-Kon Uninsulated
22-10 AWG [0.3-5.0 mm
2
] 58546-1 58545-1
Terminals and Splices
Pan-Term Nylon
22-10 AWG [0.3-5.0 mm
2
] 58433-3 58423-1
and Vinyl Insulated
Terminals and Splices
Panduit
Pan-Term Uninsulated
22-10 AWG [0.3-5.0 mm
2
] 58546-1 58545-1
Terminals and Splices
Insulkrimp Vinyl
22-10 AWG [0.3-5.0 mm
2
] 58433-3 58423-1
Insulated Terminals
and Splices
Molex
Avikrimp Nylon
22-10 AWG [0.3-5.0 mm
2
] 58433-3 58423-1
Insulated Terminals
and Splices
Versakrimp
22-10 AWG [0.3-5.0 mm
2
] 58546-1 58545-1
Uninsulated
Terminals and Splices
Connector/Terminal-to-Tool Reference
(continued)
For drawings or technical data, contact your Tyco Electronics sales engineer or call the
Technical Support Center: 1-800-522-6752. Dimensions are in millimeters unless
specified otherwise. Values in brackets are English equivalents unless specified otherwise.
Specifications subject to change. Consult Tyco Electronics for latest specifications.
Need More Information?
For information about tooling, call 1-800-522-6752
or e-mail [e-mail].
Note: All terminals are crimped to UL 486 tensile requirements.
Part Number
Premium Coax Dies—when used in combination with the proper connectors, meet all applicable
Tyco termination and performance requirements
91900-1 Fiber Optic
91901-1 BNC RG 55B
91902-1 N Series RG 141
91903-1 TNC RG 59
91904-1 Coax RG 187
91904-2 Coax RG 59,62
91904-3 Coax RG 55
91904-4 Coax RG 58
91905-1 ARINC 3 crimp
91907-1 ARINC #8 Triax
91908-1 SMA RG 188, 58
91909-1 BNC Coax
91910-1 Coax RG 187
91911-1 Coax RG 187
91911-2 Coax RG 180
91911-3 Coax
91911-4 Coax
91912-1 Coax
91912-3 Mini Coax
91912-5 Mini Coax
Part No.
1
Description
220189-1 Comm BNC, RG 58
220189-2 Comm BNC, RG 59
220189-3 Comm BNC
1424050-1 BNC
91963-2
2
Premium PIDG Die Assy,
16-14 AWG
(Same as crimp form in 47387)
91964-2
2
Premium PIDG Die Assy,
22-16 AWG
(Same as crimp form in 47386
)
91965-2
2
Premium PIDG Die Assy,
12-10 AWG
(Same as crimp form in 59239-4)
Part No.
1
Description
1. Premium coax SDE die set only. Requires additional hand tool or
power source.
2. These die options provide the same crimp profiles as those
provided in our CERTI-CRIMP hand tool line and include
adjustable insulation.The CERTI-CRIMP options have attained
MIL-T-7928 qualification, when used with the correct terminals.
ISO
9001
C
ertified
A copy of the certificate is available upon request.
©2005 by Tyco Electronics Corporation.
All Rights Reserved. AMP, AMPLIMITE, AMPSEAL, AMP SUPERSEAL 1.5 SERIES, DUALAN, FASTON, FSD, INFOPORT, LightCrimp,
MATE-N-LOK, PIDG, PLASTI-GRIP, PRO-CRIMPER, RSD, SOLISTRAND and TYCO are trademarks.
Avikrimp, Insulkrimp, and Versakrimp are trademarks of Molex.; Belden is a trademark of Belden Wire and Cable of Cooper
Industries.; Sta-Kon is a registered trademark of Thomas & Betts Corporation.; ST-Trademark of American Telephone & Telegraph Co.;
MONTROSE-Trademark of MONTROSE Products Co.; Pan-Term is a registered trademark of Panduit Corporation.