User manual

Application Specification 114-106078
Jul 11
th
, 2013 Rev. C1
This specification is a controlled document. Page 10 of 12
© Copyright 2012 by TE Connectivity Corporation
All rights reserved
Figure 12
Hand Application Tool
1. The locking mechanism is opened by depressing the latches with hand application tool (PN
1971903-1) as shown in Figure 13.
2. Disconnect the connectors connection while the special tool insertion into the locking
mechanism to depress the latches, and pull the connectors apart.
Figure 13
Disconnect the connectors
3. For installation application, it can use opening tooling to tighten operation in Figure 14
Figure 14
Tightening the connectors with Opening tool