Data Sheet

ManualsBrandsTE CONNECTIVITY ManualsResistorsCPF0603B100KE Thin film resistor 100 kΩ SMD 0603 0.063 W 0.1 % 25 ppm 1 pc(s)

Thin Film Precision Resistors

1773200 CIS WR 10/2016

Dimensions in

millimetres unless

otherwise specified

Dimensions Shown for

reference purposes only.

Specifications subject to

change

For Email, phone or live chat,

go to: www.te.com/help

Key Features

Thin film precision

resistors with TC's to

15ppm and tolerances to

0.05%.

Wide range of case sizes

from 0201 to 2512

Suitable for all

applications where close

accuracy and stability are

essential

Terminal finish –

electroplated 100% matte

Applications

Communications

Industrial Controls

Instrumentation

Medical

Type CPF Series

The CPF series is a high stability precision chip resistor range offering

various power dissipations relating to a wide range of chip sizes. The CPF

series offers TCR's down to 15ppm/°C and resistance tolerances to 0.1%.

Standard values are within the IEC 63 E96 and E24 value grids. The CPF has

accurate and uniform physical dimensions to facilitate placement

Electrical Characteristics

Chip Size

0201

Rated Power @70°C

0.03125W

Resistance Range Ω

Min.

49R9

Max

4K99

33K

4K99

33K

Tolerance

0.5

Code Letter

Selection series

E24 & E96

Temp. Coefficient (ppm/°C)

Code Letter

Operating Voltage (Max)

15V

Max. Overload Voltage

30V

Operating Temp. Range

-55 ~ +155°C

Insulation Resistance dry min.

>MΩ

Stability

0.5%

Summary of content (9 pages)

PAGE 1
Thin Film Precision Resistors Type CPF Series Key Features Thin film precision resistors with TC's to 15ppm and tolerances to 0.05%. Wide range of case sizes from 0201 to 2512 Suitable for all applications where close accuracy and stability are essential Terminal finish – electroplated 100% matte Sn Applications Communications Industrial Controls The CPF series is a high stability precision chip resistor range offering various power dissipations relating to a wide range of chip sizes.
PAGE 2
Thin Film Precision Resistors Chip Size Rated Power @70°C Min. Resistance Range Ω Max Tolerance (%) Code Letter Selection series T.C.R. (ppm/°C) Code Letter Max Operating Volt. Max. Overload Volt. Op. Temp. Range Insulation Resistance Stability Chip Size Rated Power @70°C Min. Resistance Range Ω Max Tolerance (%) Code Letter Selection series T.C.R. (ppm/°C) Code Letter Max Operating Volt. Max. Overload Volt. Op. Temp. Range Insulation Resistance Stability Chip Size Rated Power @70°C Min.
PAGE 3
Thin Film Precision Resistors Chip Size Rated Power @70°C Min. Resistance Range Ω Max Tolerance (%) Code Letter Selection series T.C.R. (ppm/°C) Code Letter Max Operating Volt. Max. Overload Volt. Op. Temp. Range Insulation Resistance Stability Chip Size Rated Power @70°C Min. Resistance Range Ω Max Tolerance (%) Code Letter Selection series T.C.R. (ppm/°C) Code Letter Max Operating Volt. Max. Overload Volt. Op. Temp. Range Insulation Resistance Stability Chip Size Rated Power @70°C Min.
PAGE 4
Thin Film Precision Resistors Chip Size Rated Power @70°C Min. Resistance Range Ω Max Tolerance (%) Code Letter Selection series T.C.R. (ppm/°C) Code Letter Max Operating Volt. Max. Overload Volt. Op. Temp. Range Insulation Resistance Stability 4R7 1M0 0.05 A 15 D 25 E 4R7 1M0 4R7 3M0 2512 0.5W 4R7 1M0 1R0 3M0 0.1 B 50 C 15 D 1R0 3M0 0.5 D E24 & E96 50 15 C D 150V 300V -55 ~ +155°C > MΩ 0.
PAGE 5
Thin Film Precision Resistors Derating Curve Power ratio(%) 100 80 60 40 20 0 0 20 40 60 80 100 120 140 160 180 Ambient Temperature(℃) Construction and dimensions L D1     W T  D2  Alumina Substrate  Bottom Electrode (Ag)  Top Electrode ( Ag)   Edge Electrode (NiCr)  Barrier Layer (Ni)  External Electrode (Sn)   Resistor Layer (NiCr)  Overcoat (Epoxy)  Marking Size L (mm) W (mm) T (mm) D1 (mm) D2 (mm) 0201 0402 0603 0805 1206 1210 2010 2512 0.58±0.05 1.00±0.
PAGE 6
Thin Film Precision Resistors Marking Case sizes 0805 to 2512 IEC 4 Digit Marking: R 1000 Resistance Code Ω K .
PAGE 7
Thin Film Precision Resistors Packaging Packing Quantity and Reel Specification Size 0201 0402 0603 0805 1206 1210 2010 2512 ØA ±1.0 ØB ±1.0 ØC ±0.7 W ±1.0 T ±1.0 Paper Tape Embossed Plastic Tape 1000 / 10000 9.5 178.0 60.0 11.5 13.5 N/A 1000 / 5000 13.5 15.5 N/A 4000 Paper tape Specification Size A ±0.05 B ±0.05 0201 0.40 0.70 0402 0.70 1.16 0603 1.10 1.90 0805 1206 1210 1.60 2.00 2.75 W ±0.10 E ±0.05 F ±0.05 P P ± . 8.00 1.75 3.5 4.00 ±0.10 ØD 1.55 ±0.03 2.
PAGE 8
Thin Film Precision Resistors Peel force of top cover tape The peel speed shall be about 300mm/min±5% The peel force of top cover tape shall be between 8gf to 60gf Embossed Plastic Tape Specifications Top Tape ψ D0 E A F B W ψ D1 1.4Min. T P1 Resistor P2 P0 direction of unreeling Emboss Tape Type A B W E F P0 P1 P2 ØD0 T 2010 2.85±0.10 5.45±0.10 12.0±0.10 1.75±0.10 5.5±0.05 4.00±0.05 4.00±0.10 2.00±0.05 1.50+0.10 1.00±0.20 2512 3.40±0.10 6.65±0.10 12.0±0.10 1.75±0.10 5.5±0.05 4.00±0.
PAGE 9
Thin Film Precision Resistors Reflow Solder Profile Reel dimension (mm) Time of Reflow soldering at maximum temperature point 260°C = 10s Wave Solder Profile Qty / Reel 2000 A ±0.5 2 B ±0.5 13.5 C ±0.5 21 D ±1 60 M ±2 178 W ±1 13.8 Handling Recommendations When flow soldering - the land width must be smaller than the Chip Resistor width to properly control the solder application. Generally, the land width can be Chip Resistor width (W) x 0.7 to 0.8.