Datasheet

106 www.te.com/enterprise-eu 05/14 313956AE
AMPTRAC Scanning Module Cable Assemblies
Every patch panel or switch port has a copper sensor pad
associated with it. All sensor pads are connected to the AMPTRAC
analyzer via a scanning module and scanning module cable. The
scanning module has two types of connector, an RJ45 connector,
which is used to connect the module to the analyzer via a standard
Category 5 or Category 6 patch cable and a 2.0mm AMPMODU
connector, which connects the module to the switch or patch
panel via the scanning module cable. For monitored devices of less
than 24 ports, multiple cables can be inserted into the AMPMODU
connector equal to the 24 port total. Each scanning module
cable is between 2-4 feet long allowing the scanning module to
be located on the left or the right and be secured on the cable
support management bar or onto the rack/cabinet.
ORDERING INFORMATION
Description # Positions Length (ft) Part Number
AMPTRACpatchpanelsutilizingthe-positionSLInterfaceModuleieSL
panelsHDPanelsQuick-FitPanelsPlug-n-PlaytommMODULatching
  -
-portSensorStripsforelectronicsEMEAAMPTRACReadyandEMEA
ASPanels(rearattachment)mmMODUtommMODULatching
  -
  -
AMPTRACMRJ-patchpanelsEMEAAMPTRACReadypatchpanels
(frontattachment)ACOHD-tommMODULatching
  -
AMPTRACFiberOpticMPOCassettesRJ-tommMODUNon-Latching   -
AMPTRACMRJXGquickfitCassette   -
AMPTRACSensorStripsforLANelectronicsbasedon
positionsmmMODUtommMODUNon-Latching
  -
  -
  -
  -
  -
Quareo Physical Layer Management System
AMPTRAC Scanning Module Cables