Datasheet

www.te.com/enterprise-eu 05/14 313956AE176
Fiber Optic Cabling
LightCrimp and LightCrimp Plus
LightCrimp Splice
FEATURES
• Terminates 250 micron coated and 900 micron
tight buered and 2.0 mm jacketed fibers
• Use with MM and SM 125 micron fibers
• Use with termination toolkit Part Number 1553212-1
• Typical attenuation 0.1 dB
• Typical return loss >20 dB MM and >35 dB SM
• Instruction sheets LightCrimp Splice: Part Number 408-10193
ORDERING INFORMATION
Description Part Number
LightCrimpSpliceformicroncoatedand
microntightbueredfibers
-
LightCrimpSpliceformmjacketedfibercable -
AMP LightCrimp Connector
FEATURES
• Cleave, crimp, polish and connect
• High performance pre-radiussed ferrules
• Reduced polishing time
• Durability: 500 cycles
• Each connector comes in a kit containing accessories needed
to terminate to 900 μm buer, 250
μm coating and 3 mm cable
• Compliant with TIA/EIA, IEC, CECC and EN standards
• No epoxy - just polish
TECHNICAL DATA INSTRUCTION SHEET LIGHTCRIMP
• Ferrule: Ceramic or stainless steel LightCrimp ST-Style; English: Part Number: 408-9860
• Attenuation (dB): 0.3 LightCrimp SC; English; Part Number: 408-4066
• Temperature range: –40 °C (ceramic) or
–25 °C (stainless steel) to +65 °C