Product Catalogue Micro-MaTch Miniature Connector System www.tycoelectronics.
Table of Contents Micro-MaTch Miniature Connector System Table of Contents Miniature Connector System 2 System Overview/Technical Data 3 Applications 3D 4 Applications 2D 5 Female-on-Board Connector Top Entry 6 Female-on-Board Connector Side Entry 7 Female-on-Board Connector Surface Mount Device (SMD) 8 Male-on-Board Connector 9 Male-on-Wire Connector 10 Paddle Board Connector 11 Crimp On Snap In (COSI) Connector 12 Specials 13 Application Tooling Lead Assembly & Sample Box 14 &
Miniature Connector System Micro-MaTch Miniature Connector System AMP Micro-MaTch Miniature Connector System Miniaturization and the trend towards higher density of electronic functions on a substrate led to the introduction of smaller interconnection systems. The AMP Micro-MaTch connector family, with it’s contact spacing of 1.27 mm, fully complies with the electronic packaging requirements of today and the future.
System Overview Micro-MaTch Miniature Connector System System Overview Technical Data Technical Data Centerline: Number of Positions: Contact Material: Contact Finish: Housing Material: AMP Product Specification: 1.27 mm (staggered) 108-19052 AMP Application Specification: 114-19016, 114-19051 4, 6, 8, 10, 12, 14, 16, 18, and 20 positions Phosphor bronze Tin-lead Thermoplastic polyester, red, glass-filled PC Board Connectors PC Board Thickness: 1.6 mm nominal PC Board Hole Diameter: 0.
Micro-MaTch Miniature Connector System Applications 3D Applications (3 dimensions) Male Connectors Female Connectors Male-on-Wire 215083 Male-on-Board 215464 COSI 338095 338096 338097 1 2 3 4 5/6 7 8 9 10 Female Top Entry 215079 Female Side Entry 215460 SMD Top Entry 188275 Image 4 Description (see also page 5) 1 Wire-to-Board through hole 2 Board-to-Board through hole 3 Wire-to-Board (discrete wire), through hole 4 Wire-to-Board right angle, through hole 5 Board-to-Board rig
Applications 2D Micro-MaTch Miniature Connector System Applications (2 dimensions) Male Connectors Male-on-Wire 215083 Female Connectors COSI 338095 338096 338097 Male-on-Board 215464 1 2 3 A C A A B B B Female Top Entry 215079 C C C 6 4 7 5 A A C B C B Female Side Entry 215460 C B AB C F E A G E D Paddle Board 215570 D C C D 8 9 10 A A A C B B B SMD Top Entry 188275 D D D Image A (max) B (max) C D (max) E (max) F(max) G (max) 1 5.2 7.5 2.
Basic Part No. 215079 Micro-MaTch Miniature Connector System Female-on-Board Connector -Top EntryNotes: 1. Connectors are always sideways mounted onto an adhesive tape. 2. Standard packaging quantity is 2500 connectors on a reel with a diameter of 600 mm. 3. At additional charge a special packaging option is available: 250 connectors on a reel with a diameter of 250 mm, packed in a dedicated dispenser box.
Basic Part No. 215460 Micro-MaTch Miniature Connector System Female-on-Board Connector -Side EntryNotes: 1. Connectors are always sideways mounted onto an adhesive tape. 2. Standard packaging quantity is 2500 connectors on a reel with a diameter of 600 mm. 3. At additional charge a special packaging option is available: 250 connectors on a reel with a diameter of 250 mm, packed in a dedicated dispenser box.
Basic Part No. 188275 Micro-MaTch Miniature Connector System Female-on-Board Connector Surface Mount Device (SMD) Notes: 1. To enable automatic Pick & Placement, connectors are always packed in embossed tape according EIA481 specification. 2. Standard packaging quantity is 900 pcs on a reel with a diameter of 330 mm. 3. Connectors are supplied with or without a feature for vacuum Pick & Placement. 4. For this connector no additional solder hold down is required.
Basic Part No. 215464 Micro-MaTch Miniature Connector System Male-on-Board Connector Notes: 1. Connectors are always sideways mounted onto an adhesive tape. 2. Standard packaging quantity is 2500 connectors on a reel with a diameter of 600 mm. 3. At additional charge a special packaging option is available: 250 connectors on a reel with a diameter of 250 mm, packed in a dedicated dispenser box. "A" 5.
Basic Part No. 215083 Micro-MaTch Miniature Connector System Male-on-Wire Connector Remark: The AMP Micro-MaTch Male-on-Wire connector is specifically designed to be disengaged from its counterpart by pulling the cable in the appropriate direction. Notes: 1. Connectors are always sideways mounted onto an adhesive tape. 2. Standard packaging quantity is 2500 connectors on a reel with a diameter of 600 mm. 3.
Basic Part No. 215570 Micro-MaTch Miniature Connector System Paddle Board Connector Notes: 1. Connectors are always sideways mounted onto an adhesive tape. 2. Standard packaging quantity is 2500 connectors on a reel with a diameter of 600 mm. 3. At additional charge a special packaging option is available: 250 connectors on a reel with a diameter of 250 mm packed in a dedicated dispenser box. "A" MAX.
Basic Part No. 338095 Micro-MaTch Miniature Connector System Crimp On Snap In (COSI) Connector Basic Part No. 338095 + Contacts 338096, 338097 Notes: 1. Contacts can be crimped using a G-terminator or mini stipper crimper based applicator. 2. For the contacts on strip the standard packaging quantity is 15.000 pcs on a reel with a diameter of 600 mm. 3. For repair/service contacts are packaged 750 pcs. Per reel, to be used with handtools. 4.
Micro-MaTch Miniature Connector System Specials Specials - SMC connector - Locking Latch - In-board SMD - Male SMD - SMC connector: 100411 This connector type enables a solderless application to the printed circuit board. Contact is made on the surface of the PCB, enabling the use of paperphenol and expoxy boards with both drilled and punched holes. This connector is suitable for both Wire-to-Board as Board-to-Board connections.
Micro-MaTch Miniature Connector System Application Tooling Application Tooling Pistol handgrip tooling. This is a handtool for Standard pistol handgrip PN = 734155-1. Pistol handgrip adapter set PN = 734024-1. terminating Micro-MaTch Male-on-Wire and This basic tool can be used for both Micro-MaTch This adapter can be used for Micro-MaTch Paddle Board connectors. Meant for small quan- and AMP-LATCH applications. terminations, together with the pistol handgrip. tities or repair services.
Micro-MaTch Miniature Connector System Application Tooling Application Tooling Semi automatic tooling PN 677410-1. This tool can be used for Micro-MaTch lead end and for daisy chain assembly applications. Semi automatic tooling PN 677412-5. For Micro-MaTch only and 1-677412-0 for both Micro-MaTch and AMP-LATCH. This machine can be used for lead end assemblies. Connector dispensor PN 677463-1. The dispensor accepts the Micro-MaTch standard reels (2500 pcs/reel).
Lead Assembly & Sample Box Micro-MaTch Miniature Connector System Lead Assembly It is possible to deliver custom made Micro-MaTch lead assemblies, both cable end assemblies and daisy-chain assemblies, in all positions between 4 and 20 in all required cable lengths. All leads are 100% electrically tested on shortcut and connection before shipment. A flexible 7 stranded cable is used for easy assembly. Special cable on request. For order information contact Tyco Electronics-AMP.
Tyco Electronics-AMP Worldwide Americas Argentina – Buenos Aires Phone: +54-1-733-2000 Fax: +54-1-717-0988 Chile – Santiago Phone: +56-2-739-1230 Fax: +56-2-739-1227 United States – Harrisburg, PA Phone: +1-717-564-0100 Fax: +1-717-986-7575 Brazil – Sao Paulo Phone: +55-11-861-1311 Fax: +55-11-861-0397 Colombia – Bogota Phone: +57-1-231-9398 Fax: +57-1-240-3769 Venezuela – Caracas Phone: +58-2-986-7774 Fax: +58-2-986-9739 Canada – Toronto Phone: +1-905-475-6222 Fax: +1-905-474-5520 Mexico – Mexico Ci