Information
COPPER TUBULAR TERMINALS
XCT TYPE
• A full range for cross
sections conductors from
1,5 mm² to 630 mm²
• Inspection hole on
the barrel of the terminal
allows for quick control
when the conductor is
well positioned
• Crimping by hexagonal
compression or indent
• Can be crimped with a
variety of tools
KEY FEATURES TE Connectivity’s (TE) XCT tubular terminals are ideally suited to connect
electrical copper conductors to equipment terminals.
XCT terminals are made of highly conductive electrolytic copper with a
bright tin finish. It oers outstanding resistance to oxidation and corrosion,
and allows for quick identification, easy installation and checking.
Designs include ring tongue terminals, right angle, compact narrow tongue
terminals, and sleeves.
These terminals comply with NF C 20 130 French standard. While using the
terminals with flexible conductors, it is necessary to use a section that is
just above or the next largest section. For example: for a flexible conductor
at 35 mm
2
, use the lug with marking at 50 mm
2
.
ENERGY /// COPPER TUBULAR TERMINALS AND SLEEVES XCT TYPE
Customers can count on consistent, high quality products, driven by TE’s
proven innovation and backed by our extraordinary customer support.