Information

114-13065
10 of 10
Rev C
6. VISUAL AID
The illustration below shows a typical application of this product. This illustration should be used by production
personnel to ensure a correctly applied product. Applications which DO NOT appear correct should be inspected
using the information in the preceding pages of this specification and in the instructional material shipped with
the product or tooling.
FIGURE 13. VISUAL AID
TPA IN LOCKED
POSITION
CPA FULL BACK TO
MATE OR UNMATE
CONTACTS FULLY
SEATED IN HOUSING
SEALING PLUGS
FULLY BOTTOMED
AGAINST FLANGE
CPA IN LOCKED
POSITION
CAP AND PLUG
HOUSING FULLY
MATED
NOTE: ALL CONTACTS
MUST BE TERMINATED
ACCORDING TO THE
INFORMATION PROVIDED
IN APPLICATION
SPECIFICATION 114-13045.