Datasheet

Mini- Universal MATE- N- LOK Splash- Proof Sealed Connect ors 114- 13089
Rev B12 of 20 Tyco Electronics Corporation
D. Layout
The holes in the pc board must be precisely located to ensure proper placement and optimum
performance of the pin header. The pc board layout must be designed using the dimensions provided on
the customer drawing for the specific pin header. Reference samples of the recommended pc board
layouts are shown in Figure 10.
0.13 [.005]
Figure 10
Sample Recommended PC Board Layout
6--Position Vertical Pin Header
6--Position Right--Angle Pin Header
M
3
Recommended Mounting Hole Pattern for 1.57--Thick PC Board
Tolerances Non--Accumulative
1.40+
0.08
[.055+
.003]
Typ
4.45 [.175]
3.18 [.125]
4.14 [.163]
4.14 [.163] Typ
3.86+
0.05 [.152+.002]
7.34 [.289]
1.40+
0.08 [.055+.003]
Recommended Mounting Hole Pattern for 1.57--Thick PC Board
Coordinate Dimension Applies from Center of Actual Feature
Recommended for Edge Mounting
6Plc
5.33 [.210]
4.14 [.163]
4.14 [.163] 4.14 [.163]
3
4
4
E. Pin Header Spacing
Care must be used to avoid interference between adjacent pin headers and other components. The
minimum allowable distance between pin headers to ensure proper mating is provided in Figure 11.