Datasheet

ManualsBrandsTE CONNECTIVITY ManualsRelaysPCB relays 12 Vdc 16 A 1 change-over RT314F12 1 pc(s)

Datasheet Rev. FE1

Issued 2006/05

www.tycoelectronics.com

www.schrackrelays.com

Dimensions are in mm unless

otherwise specified and are

shown for reference purposes

only.

Product specification

according to IEC 61810-1.

Product data, technical para-

meters, test conditions and

processing information

only to be used together

with the 'Definitions' at

schrackrelays.com in the

‘Schrack’ section.

Specifications subject to

change.

General Purpose Relays

Power PCB Relay RT1 bistable

1 pole 16 A, 1 CO contact

Polarized bistable version with 1 or 2 coils

5 kV / 10 mm coil-contact

Reinforced insulation

RoHS compliant (Directive 2002 / 95 / EC)

as per product date code 0413

Applications

Battery powered equipment or applications with

"memory function”

F0176-B

Approvals

V REG.-Nr. 6106, Z E214025

Technical data of approved types on request

Contact data

Contact configuration 1 CO contatct

Contact set single contact

Type of interruption micro disconnection

Rated current 16 A

Rated voltage / max.switching voltage AC 240/400 VAC

Limiting continuous current 20 A

Maximum breaking capacity AC 4000 VA

Limiting making capacity, max 4 s, duty factor 10% 30 A

Contact material AgNi 90/10

Mechanical endurance > 5 x 10

cycles

Rated frequency of operation with / without load 6 / 1200 min

-1

Contact ratings

Type Load Cycles

RT314 20 A, 250 VAC, NO contact, 85°C, UL508 6x10

RT314 Pilot duty A300 (NO contact), B300 (CO/NC contact), UL508

RT314 1hp @ 240 VAC, 1/2hp @ 120 VAC, NO contact, UL508

Coil data 1 coil 2 coils

Rated coil voltage range DC coil 5...24 VDC

Coil power typ 400 mW typ 600 mW

Operative range 2

Limiting voltage, % of rated coil voltage 120% 150%

Minimum energization duration 30 ms

Maximum energization duration 1 min at < 10% DF

Coil insulation system according UL1446 class F

Coil versions, bistable coil

Coil Rated Operate Reset Coil Rated coil

code voltage voltage voltage resistance power

VDC VDC VDC c mW

bistable, 1 coil

A05 5 3.5 3.5 62+10% 403

A06 6 4.2 4.2 90+10% 400

A12 12 8.4 8.4 360

10% 400

A24 24 16.8 16.8 1440

10% 400

bistable, 2 coils

F05 5 3.5 3.5 42+10% 595

F06 6 4.2 4.2 55+10% 655

F12 12 8.4 8.4 240

10% 600

F24 24 16.8 16.8 886

10% 650

All figures are given for coil without preenergization, at ambient temperature +23°C

Other coil voltages on request

Summary of content (3 pages)

PAGE 1
General Purpose Relays Power PCB Relay RT1 bistable I 1 pole 16 A, 1 CO contact I Polarized bistable version with 1 or 2 coils I 5 kV / 10 mm coil-contact I Reinforced insulation I RoHS compliant (Directive 2002 / 95 / EC) as per product date code 0413 Applications Battery powered equipment or applications with "memory function” F0176-B Approvals V REG.-Nr.
PAGE 2
General Purpose Relays Power PCB Relay RT1 bistable (Continued) Coils operation Version Coil terminals Pull-in Reset Contact position not defined at delivery 1 coil A1 A2 + + A1 - 2 coils A3 + + A2 - Insulation Dielectric strength coil-contact circuit open contact circuit Clearance / creepage coil-contact circuit Material group of insulation parts Tracking index of relay base Insulation to IEC 60664-1 Type of insulation coil-contact circuit open contact circuit Rated insulation voltage Pollution degr
PAGE 3
General Purpose Relays Power PCB Relay RT1 bistable (Continued) Product key R T 3 1 4 Type Version 3 16 A, pinning 5 mm, flux proof Contact configuration 1 1 CO contact Contact material 4 AgNi 90/10 Coil Coil code: please refer to coil versions table, preferred types in bold print Product key RT314A12 RT314A24 RT314F12 RT314F24 Version 16 A pinning 5 mm flux proof Contacts 1 CO contact Cont.