Datasheet

CRIMPAC, 8-1579024-6
OPERATING
INSTRUCTION
S
411-18628-1
Page 3 - 9
 For action steps
 For action results
2.2.2 Notes
General note on operation/use.
2.2.3 Safety instructions
Special safety instructions are provided where necessary. See Section 3.3.
3 General safety instructions
The hand tool has been manufactured in line with current industry standards and recog-
nised safety regulations.
Nevertheless, there is a risk of personal injury and material damage if the following gen-
eral safety instructions and the warnings preceding the instructions in these operating in-
structions are not observed.
View RoHS information
Information on the presence and location of all substances subject to RoHS Directive
(Restriction of Hazardous Substances) can be found on the following website:
http://www.te.com/en/resources/product-compliance.html
 Click on Test Product Compliance and Request Statements of Compliance
(Statements of Compliance, SoC).
 Click the entry field below Product Compliance and enter the relevant part num-
ber(s).
 Click the "Search" button.
 The search results are displayed.
3.1 Intended use
This hand tool closes a gap between industrial crimping tools with safety ratchet and the
Super Camp Service crimping tool.
The Crimpac crimping tool is suitable for different Faston and Fastin-Faston terminals. It
features a wire stripper and five F-crimp nests.
The crimp nests can be selected as required and must be of the correct size for
the terminal.