Datasheet
04-2011, Rev. 0411
www.te.com
© 2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
1
OEG
General Purpose Relays
PCB Relays
n
10A contact rating
n
UL TV-5 and TV-8 rating
n
1 form A (NO) contact arrangement
n
Sensitive and standard coils available
Typical applications
Appliances, HVAC, cable TV, monitor display
Approvals
UL E58304, TUV R50138781, VDE 40019832, CQC03001002917
Technical data of approved types on request
Contact Data
Contact arrangement 1 Form A (NO)
Rated voltage 250VAC, 30VDC
Max. switching voltage 250VAC, 30VDC
Rated current 5 to 10A
Contact material AgSnO
2
Min. recommended contact load 100mA at 5VDC
Frequency of operation 360 ops./h
Operate/release time max. 15/5ms
Electrical endurance
SDT-LMR(2): 5A, 250VAC res, 70°C 100x10
3
ops.
TV-5, 120VAC 25x10
3
ops.
SDT-DMR(2): 10A, 250VAC res, , 70°C 100x10
3
ops.
TV-8, 120VAC 25x10
3
ops.
Contact ratings 5 to 10A
Mechanical endurance, DC coil 10x10
6
operations
Coil Data
Coil voltage range 3 to 48VDC
Operative range, IEC 61810 1
Coil insulation system according UL Class E
Contact Data (continued)
Coil versions, DC coil
Coil Rated Operate Release Coil Rated coil
code voltage voltage voltage resistance power
VDC VDC VDC Ω±10% mW
SDT-LMR & SDT-DMR2
003 3 2.25 0.3 36 250
005 5 3.75 0.5 100 250
006 6 4.50 0.6 144 250
009 9 6.75 0.9 324 250
012 12 9.00 1.2 576 250
018 18 13.50 1.8 1296 250
024 24 18.00 2.4 2304 250
SDT-DMR
003 3 2.25 0.3 16.7 540
005 5 3.75 0.5 46.3 540
006 6 4.50 0.6 66.7 540
009 9 6.75 0.9 150 540
012 12 9.00 1.2 267 540
018 18 13.50 1.8 600 540
024 24 18.00 2.4 1067 540
048 48 36.00 4.8 4267 540
SDT-LMR2
003 3 2.25 0.3 60 150
005 5 3.75 0.5 167 150
006 6 4.50 0.6 240 150
009 9 6.75 0.9 540 150
012 12 9.00 1.2 960 150
018 18 13.50 1.8 2160 150
024 24 18.00 2.4 3840 150
All figures are given for coil without pre-energization, at ambient temperature +23°C
Miniature PCB Relay SDT-R
477
Dimensions are shown for
reference purposes only.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Specifications and availability
subject to change.
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
OEG
Catalog 1308242
Issued 3-03
Reference Data
Wiring Diagram (Bottom View)
Outline Dimensions
Operating Voltage (SDT-LMR) Operate Time Life Expectancy
PC Board Layout (Bottom View)
24
20
16
12
8
4
0.2
0.4
0.6 0.8 1.0 1.2 1.4
Coil Power (W)
Time (msec)
Release Time
Operate Time
-40 -20
Ambient Temp. (°C)
20
% of Supplying Voltage to Coil
0
20 40 60 80 100
40
60
80
100
120
140
160
0
180
120
140
Operating
Voltage Range
Pick-Up Voltage
Cool Coil
Hot Coil 5A Applied
Maximum
Allowable
Coil
Voltage
100
2
Contact Current (A)
Operation (x 10
4
)
10
1
4
6
8
10
12
0
250VAC Resistive
(250mW Coil)
250VAC Resistive
(540mW Coil)
Note: This data is based on the max. allowable
temperature for E type insulation coil (115°C).
.394 ± .012
(10.0 ± .3)
.02
(.5)
.945 ± .012
(24.0 ± .3)
.018
(.45)
.984 ± .012
(25.0 ± .3)
.008
(.2)
.098
(2.5)
.018
(.4)
.039
(1.0)
.646 ± .012
(16.4 ± .3)
.295
(7.5)
.138 ± .008
(3.5 ± .2)
.039
(1.0)
.646 ± .004
(16.4 ± .1)
.295 ± .004
(7.5 ± .1)
2 – .05 DIA
(1.3)
.38 ± .004
(3.5 ± .1)
2 – .059 DIA
(1.5)
Ordering Information
Typical Part Number B SDT -S -1 12 L M R ,000
1. Basic Series:
SDT = Miniature Power PC board relay.
2. Enclosure:
S = Snap-on (Flux-tight)* cover.
3. Termination:
1 = 1 pole
4. Coil Voltage:
05 = 5VDC 09 = 9VDC 24 = 24VDC
06 = 6VDC 12 = 12VDC 48 = 48VDC
5. Coil Input:
L = Sensitive (250mW) D = Standard (540mW)
6. Contact Arrangement:
M = 1 Form A, SPST-NO
7. Construction:
R = New construction
8. Suffix:
,000 = Standard model Other Suffix = Custom model
* Not suitable for immersion cleaning processes.
None at present.
Our authorized distributors are more likely to maintain the following items in stock for immediate delivery.
Coil operative rangeOperate time
477
Dimensions are shown for
reference purposes only.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Specifications and availability
subject to change.
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
OEG
Catalog 1308242
Issued 3-03
Reference Data
Wiring Diagram (Bottom View)
Outline Dimensions
Operating Voltage (SDT-LMR) Operate Time Life Expectancy
PC Board Layout (Bottom View)
24
20
16
12
8
4
0.2
0.4
0.6 0.8 1.0 1.2 1.4
Coil Power (W)
Time (msec)
Release Time
Operate Time
-40 -20
Ambient Temp. (°C)
20
% of Supplying Voltage to Coil
0
20 40 60 80 100
40
60
80
100
120
140
160
0
180
120
140
Operating
Voltage Range
Pick-Up Voltage
Cool Coil
Hot Coil 5A Applied
Maximum
Allowable
Coil
Voltage
100
2
Contact Current (A)
Operation (x 10
4
)
10
1
4
6
8
10
12
0
250VAC Resistive
(250mW Coil)
250VAC Resistive
(540mW Coil)
Note: This data is based on the max. allowable
temperature for E type insulation coil (115°C).
.394 ± .012
(10.0 ± .3)
.02
(.5)
.945 ± .012
(24.0 ± .3)
.018
(.45)
.984 ± .012
(25.0 ± .3)
.008
(.2)
.098
(2.5)
.018
(.4)
.039
(1.0)
.646 ± .012
(16.4 ± .3)
.295
(7.5)
.138 ± .008
(3.5 ± .2)
.039
(1.0)
.646 ± .004
(16.4 ± .1)
.295 ± .004
(7.5 ± .1)
2 – .05 DIA
(1.3)
.38 ± .004
(3.5 ± .1)
2 – .059 DIA
(1.5)
Ordering Information
Typical Part Number B SDT -S -1 12 L M R ,000
1. Basic Series:
SDT = Miniature Power PC board relay.
2. Enclosure:
S = Snap-on (Flux-tight)* cover.
3. Termination:
1 = 1 pole
4. Coil Voltage:
05 = 5VDC 09 = 9VDC 24 = 24VDC
06 = 6VDC 12 = 12VDC 48 = 48VDC
5. Coil Input:
L = Sensitive (250mW) D = Standard (540mW)
6. Contact Arrangement:
M = 1 Form A, SPST-NO
7. Construction:
R = New construction
8. Suffix:
,000 = Standard model Other Suffix = Custom model
* Not suitable for immersion cleaning processes.
None at present.
Our authorized distributors are more likely to maintain the following items in stock for immediate delivery.
477
Dimensions are shown for
reference purposes only.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Specifications and availability
subject to change.
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
OEG
Catalog 1308242
Issued 3-03
Reference Data
Wiring Diagram (Bottom View)
Outline Dimensions
Operating Voltage (SDT-LMR) Operate Time Life Expectancy
PC Board Layout (Bottom View)
24
20
16
12
8
4
0.2
0.4
0.6 0.8 1.0 1.2 1.4
Coil Power (W)
Time (msec)
Release Time
Operate Time
-40 -20
Ambient Temp. (°C)
20
% of Supplying Voltage to Coil
0
20 40 60 80 100
40
60
80
100
120
140
160
0
180
120
140
Operating
Voltage Range
Pick-Up Voltage
Cool Coil
Hot Coil 5A Applied
Maximum
Allowable
Coil
Voltage
100
2
Contact Current (A)
Operation (x 10
4
)
10
1
4
6
8
10
12
0
250VAC Resistive
(250mW Coil)
250VAC Resistive
(540mW Coil)
Note: This data is based on the max. allowable
temperature for E type insulation coil (115°C).
.394 ± .012
(10.0 ± .3)
.02
(.5)
.945 ± .012
(24.0 ± .3)
.018
(.45)
.984 ± .012
(25.0 ± .3)
.008
(.2)
.098
(2.5)
.018
(.4)
.039
(1.0)
.646 ± .012
(16.4 ± .3)
.295
(7.5)
.138 ± .008
(3.5 ± .2)
.039
(1.0)
.646 ± .004
(16.4 ± .1)
.295 ± .004
(7.5 ± .1)
2 – .05 DIA
(1.3)
.38 ± .004
(3.5 ± .1)
2 – .059 DIA
(1.5)
Ordering Information
Typical Part Number B SDT -S -1 12 L M R ,000
1. Basic Series:
SDT = Miniature Power PC board relay.
2. Enclosure:
S = Snap-on (Flux-tight)* cover.
3. Termination:
1 = 1 pole
4. Coil Voltage:
05 = 5VDC 09 = 9VDC 24 = 24VDC
06 = 6VDC 12 = 12VDC 48 = 48VDC
5. Coil Input:
L = Sensitive (250mW) D = Standard (540mW)
6. Contact Arrangement:
M = 1 Form A, SPST-NO
7. Construction:
R = New construction
8. Suffix:
,000 = Standard model Other Suffix = Custom model
* Not suitable for immersion cleaning processes.
None at present.
Our authorized distributors are more likely to maintain the following items in stock for immediate delivery.
Electrical endurance
Z tV