TYCHO [ Electronics AP GREEN PAR* Hex Crimp Die Assembly 9-1478242-0 Instruction Sheet 408-8694 GODUNOV 02 Have PROPER USE GUIDELINES Cumulative Trauma Disorders canrasultfrom the prolonged use of manually powered hand tools. Hand tools are intended for occasional use and low volume: replication. A wide selection of powered application equipment for extended-use, production operations is available.
ten [ GREEN PAR Hex Crimp Die Assembly 9-1478242-0 408-8694 AN Insert Center Contact into Partially Closed gfigs:! Crlm(mg oes Center Conductor 4.2 Ferrule 1. Insert the crimped center contact into the connector body until the cable dielectric butts against the dielectric inside of the connector body. The flared braid will then fit around the support sleeve of the connector body. 2. Slide the ferrule forward over the braid until the ferrule butts against the shoulder on the connector body. 3.
fly | Electronics GREEN PAR Hex Crimp Die Assembly 9-1478242-0 408-8634 AR Die Assembly 9-1476242-0 1.7540.10 260 +0.10 [068 +.004] o [102 £.004] (56040.10 SN 220 4.4 ST 6504010 (220,004 255 £,004] Figure 5 Figure 5 provides information on die opening sizes. 5.3. Ratchet Adjustment The fool frame assembly ratchet mechanism features an adjustment wheel with nine settings. The adjustment wheal controls the amount of handle pressure exerted on the tool jaws and crimping dies during crimping.