Datasheet

Seite / Page 10 of 14 ECOC: EGC0 ; LOC: AI
Matrize
PN 9-1579022-1
9-1579022-2
9-1579022-3
411-18465 / Rev. A1
Hand Tool
PN 9-1579022-1
9-1579022-2
9-1579022-3
411-18465 / Rev. A1
Abbildung 6 / Figure 6
7. Überprüfen Sie die Crimphöhe, wie nachstehend
beschrieben. Nehmen Sie wenn nötig eine
Einstellung der Crimphöhe vor, wie im Kapitel 6
beschrieben.
Crimpmatrize
Leitungsgröße
(max.)
Wire Size
(max.)
Crimpbereich
(DGB-
Markierung)
Crimp section
(Wire size marking)
Crimphöhe (A)
und Toleranz (± 0,05)
Crimp height (A)
and tolerance (± 0,05)
0,32 mm² 0,32 mm² 1,24 mm
0,50 mm² 0,50 mm² 1,30 mm
9-1579022-1
0,75 mm² 0,75 mm² 1,38 mm
0,50 mm² 0,50 mm² 1,40 mm
0,75 mm² 0,75 mm² 1,48 mm
1,00 mm² 1,00 mm² 1,56 mm
9-1579022-2
1,50 mm² 1,50 mm² 1,72 mm
1,00 mm² 1,00 mm² 1,52 mm
1,50 mm² 1,50 mm² 1,65 mm
2,00 mm² 2,00 mm² 1,78 mm
9-1579022-3
2,50 mm² 2,50 mm² 1,91 mm
Abbildung 7 / Figure 7
1. Check the contact crimp height as described
below. If necessary, adjust the crimp height as
described in chapter 6.