User manual

Locking Clip Cont acts and Housings 114- 25006
Rev F6 of 9 Tyco Electronics Corporation
D. Locking Lance
Locking lance may not be deformed or damaged. Dimensions are given in Figure 4.
E. Stabilizer
After crimping, the stabilizer may not be deformed. See Figure 8.
Figure 8
Stabilizer
Crimped Contact
3.5. Housing
A.
Keying Plugs
Keying plugs provide housing identification and polarization by not allowing a post to enter the contact
cavity where the keying plug is installed. The latch must be oriented with the extraction slot cavity. The
plug can be removed with the extraction tool. See Figure 9.
Figure 9
Keying Plug 87179
(Ref)
Double- Row
Housing
Single-Row
Housing
Extraction Slot
Cavity
Latch