User manual

Locking Clip Cont acts and Housings 114- 25006
Rev F8 of 9 Tyco Electronics Corporation
Figure 11
Stacking Double- Row
Housings
PC Board
Right End
Open
Left End Open
Key
3.6. Repair
A damaged contact can be removed independently of all other contacts and replaced with a new one. All
contacts must be removed from a damaged housing and the housing replaced with a new one.
4. QUALIFICATIONS
Locking Clip Contact and Housing Assemblies are Component Recognized by Underwriters Laboratories Inc.
(UL) in File E28476 and Certified by CSA International in File LR7189.
5. TOOLING
The hand crimping tools for these contacts are designed for service and repair work. Hand tools and
applicators include integral dies. The semi--automatic machine, equipped with the applicator, is designed for
production assembly. The use of the extraction tool is designed to remove individual contacts from posts and
for extracting keying plugs and contacts from the housings.
The hand tools, machine and applicator, and the instructional material are shown in Figure 12. The hand tools
are listed as they relate to wire size.
Applicator
466721--2
(408--8040)
Typical Hand
Crimping Tool
Extraction Tool
91084--1
(408--7604)
AMP--O--LECTRIC Model
“K” Terminating Machine
565435--5 (409--5128)
HAND CRIMPING TOOL INSTRUCTION SHEET WIRE SIZE RANGE, AWG
90295--1 408--7627 30--28
90289--1 408--7443 26--22
90431--1 408--9388 24--20
Figure 12