Datasheet

114-18025
Rev T 21 of 21
T
Sheet 7, 8: Fig. / Bild 1updated. Sheet 12: D corrected bunch was collar
G.Abraham 08.10.2015
S
Crimp tool number and hand crimp tool number corrected
M.Brunner 04.05.2015
R
Note for column ISO CH added. Views of the crimped contacts (below the tables) corrected
Seals for FLU wires added (table 2) / Adaptation stripping length (table 1 + 2)
M.Brunner 27.11.2014
P
Note 6) added to table 1
Brunner 06/13
N Specification overworked: reinforced wire added; TE Logo changed; PN of
OCEAN applicator added; parts for small wire size added
Brunner 02/13
M CRIMP TOOL, HAND CRIMP TOOL, WIRE SIZE AND WIRE CRIMP
HEIGHT UPDATED. 0.14, 0.20 AND 0.22 ADDED.
Kampmann 06/03
L CRIMP HEIGTH 0.93 ADDED(SHEET 15) CRIMPER WIDTH TEST DIM
CP1 CHANGED FROM 2.8/2.9 TO 1.4 (SHEET 15 AND 16)
Kampmann 04/03
K Specification overworked: FOR O.5SQRMM WIRE IN AIRBAG
APPLICATIONS THE CONTACT FOR WIRE SIZE 0.5...0.75 IS
PRESCRIBED NEW WIRE CRIMP HEIGTH 0.93 MM FOR WIRE SIZE
0.5ÞSQRMM ADDED INTABLE 1
Kampmann 02/03
J Englisch translation added Jetter 10/1996
I not applicable - -
H Specification complete revised Jetter 24.08.1994
G Table 1 / 2 and item 3.2 PN changed Jetter 04.10.1993
F Table 1 and 2 changed Bömmel 08.02.1993
E Table 1 changed Bömmel 19.11.1992
D item 3 application changed Ott 09.09.1992
C Table 2 changed; Assembly Tool added Ott 07.07.1992
B Table 2 changed; Assembly Tool added Ott 27.03.1991
A Notes added Herth 08.08.1991
Rev. Aenderung / modifications Erstellt/created Datum/date