Datasheet

RAYGEL PLUS
CABLE JOINTS FILLED WITH POWERGEL FOR
SINGLE AND MULTI-CORE POLYMERIC CABLES 0.6/1 KV
• Quick, easy and clean
installation
• Reliable water protection
• Suitable for outdoor and
direct-buried applications
• Full branch capabilities
without cutting main cables
• Optimized joint design,
integrated strain relief
• Qualified to joint standard
EN 50393
• Halogen-free and UV-resistant
• Unlimited shelf life,
environment-friendly and
not subject to labeling
requirements
KEY FEATURES TE Connectivity’s (TE) RayGel Plus joints oer protection, insulation and
high quality sealing for fast, easy and safe cable connections. The newly
designed types of joints oer a full range of branching capabilities from
2x1.5 to 5x16 mm² and are suitable for underground, direct buried and
overhead applications.
The RayGel Plus enclosure, with its revolutionary PowerGel, covers and
seals the joint quickly and easily, saving both time and eort. PowerGel
is rated to 90°C continuous temperature and is halogen-free with an
unlimited shelf life.
The halogen-free poly-propylene enclosure is designed to house straight
and branch connections in one solution only. This helps to minimize the
required stock level and serves a wide range of applications. RayGelPlus
joints can be snap-closed by hand due to its flexible wave-like gel
barriers. A strain relief is integrated within the enclosure and quickly
installed with two cable ties.
With the unique universal connector block, installation is very straight
forward, as the block snaps into the bottom side of the enclosure.
A supplementary tool helps to insert the sliding nuts and holds them in
place until the connection is finalised.
Customers can count on consistent, high quality products, driven by TE’s
proven innovation and backed by our extraordinary customer support.
ENERGY /// RAYGEL PLUS