Brochure
01-2015, Rev. 0115
www.te.com
© 2015 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
1
SCHRACK
General Purpose Relays
PCB Relays
n
1 pole 8A, 1 form C (CO) or 1 form A (NO) contact
n
4kV coil-contact
n
Vertical and horizontal version
n
Wash tight
n
RoHS compliant (Directive 2011/65/EC)
Typical applications
I/O modules, heating control, timers
Approvals
VDE Cert. No. 5146, UL E214025
Technical data of approved types on request
Contact Data 8A 5A bifurcated
Contact arrangement 1 form C (CO) or 1 form A (NO)
Rated voltage 250VAC
Max. switching voltage 400VAC
Rated current 8A 5A 5A
Limiting making current,
max 4 s, duty factor 10% 15A - -
Breaking capacity max. 2000VA 1250VA 1250VA
Contact material AgCdO, AgNi0.15 AgNi0.15
AgNi20
Contact style single single bifurcated
contact contact contact
Frequency of operation, with/without load 360/72000h
-1
Operate/release time typ. 7/3ms
Bounce time typ., form A/form B 0.5/3ms
Contact ratings
Type Contact Load Cycles
IEC61810
AgCdO C (CO) 8A, 250VAC, resistive, 70°C 20x10
3
AgNi20 C (CO) 8A, 250VAC, resistive 70°C 20x10
3
AgCdO A (NO) 8A, 250VAC, resistive, 70°C 20x10
3
AgNi20 A (NO) 8A, 250VAC, resistive, 70°C 30x10
3
AgNi0.15 A (NO) 5A, 250VAC, resistive, 70°C 20x10
3
Mechanical endurance >20x10
6
operations
Coil Data
Coil voltage range 6 to 110VDC
Coil versions, DC coil
Coil Rated Operate Release Coil Rated coil
code voltage voltage voltage resistance power
VDC VDC VDC Ω±15%
1)
mW
001 6 4.2 0.6 80
1)
450
002 12 8.3 1.2 330
1)
436
006 24 16.8 2.4 1200 480
013 48 33.6 4.8 4700 490
023 60 42.0 6.0 7200 500
028 110 77.0 11.0 23400 517
1) Coil resistance ±10%.
All figures are given for coil without pre-energization, at ambient temperature +23°C.
Other coil voltages on request.
Insulation Data
Initial dielectric strength
between open contacts 1000V
rms
between contact and coil 4000V
rms
Clearance/creepage
between contact and coil ≥4/4mm
Material group of insulation parts IIIa
Tracking index of relay base PTI225V
Power PCB Relay Card E
Z