User Manual

Contents
Thank you for choosing TEAC. Read this manual carefully to get
the best performance from this unit.
IMPORTANT SAFETY INSTRUCTIONS ...........................2
Trademarks and copyrights....................................3
Before use.....................................................4
Connections ..................................................5
Names and functions of parts .................................5
Handling records..............................................6
Dust cover ....................................................6
Basic operation................................................7
Notes about record styluses ...................................8
Listening with Bluetooth® speakers............................8
Troubleshooting ..............................................9
Specifications .................................................9
Before use
Included items
Check to be sure the box includes all the supplied accessories
shown below. Please contact the store where you purchased
this unit if any of these accessories are missing or have been
damaged during transportation.
Rubber mat × 1
45 RPM record (EP) adapter × 1
Dust cover × 1
Hinges × 2
RCA audio cable × 1
AC adapter (GPE053A-V120050) × 1
Owner’s manual (this document, including warranty) × 1
o Keep this manual in a safe place for future reference.
o For information about the warranty, users living in the
USA and Canada should see page58 and the back
cover (warranty document). Users living in Europe and
other regions should see page59.
o The 45 RPM adapter and the box that contains the AC
adapter and other included accessories are inside the pack-
ing material as shown in the illustration below.
Box with AC adapter
and other accessories
45 RPM adapter
Packing material
Precautions for use
o Place the unit on a flat surface.
o Do not place anything on the dust cover. Objects on the
cover might cause noise due to vibrations or fall off, espe-
cially during playback.
o Avoid placing the unit in direct sunlight, close to a source
of heat or in other similar conditions. Do not place the unit
on top of an amplifier or other equipment that might gen-
erate heat that exceeds the operating temperature range of
this unit. Doing so could cause discoloration, deformation
or malfunction.
o As the unit could become warm during operation, always
leave sufficient space around it for ventilation. When
installing this unit, leave a little space (at least 20cm (8”))
between it and other devices and walls to allow good heat
dissipation.
When placing it in a rack, for example, leave at least 35cm
(13 3/4”) open above it and 10cm (4”) open behind it.
Failure to provide these gaps could cause heat to build up
inside and result in fire.
o DO NOT MOVE THE UNIT DURING PLAYBACK. During play-
back, the record rotates. Do not lift or move the unit during
playback. Doing so may damage the record, the stylus, the
cartridge or the unit.
o Always remove the record before relocating or moving this
unit. Moving the unit with a record on the platter could
damage the record, the stylus and the cartridge or could
cause a malfunction.
o The voltage supplied to the unit should match the voltage
as printed on the rear panel. If you are in any doubt regard-
ing this matter, consult an electrician.
Maintenance
If the surface of the unit gets dirty, wipe it with a soft cloth or
use diluted mild liquid soap. Allow the surface of the unit to dry
completely before using.
o Do not use chemical cleaning cloths, thinner or similar sub-
stances as they could damage the surface of the unit.
V
CAUTION
For safety, disconnect the power cord from the socket before
cleaning.
Using the TEAC International Site
You can download updates for this unit from the TEAC
International Site:
https://teac.jp/int/
Click Language at the top right of the page and select the
desired country or region to access a page in the correspond-
ing language.
4