User Manual

ENGLISH
Basic operation
Playing records
ATTENTION
Do not vibrate the unit during playback. Doing so could cause
the sound to skip and damage the record and stylus.
1 Press the STANDBY/ON button on the
back of the unit to turn it on.
2 Open the dust cover slowly.
V
Be careful not to pinch your fingers, for
example, when opening and closing the
dust cover.
3 Place a record on the platter.
When playing a 45 RPM large-hole single record, use the
included adapter.
4 Select the rotation speed indicated on
the record.
The rotation speed can be set to 33 1/3, 45 or 78RPM.
5 Move the tonearm clasp to the right to
release the tonearm.
Clasp
6 Push the tonearm lifter lever toward the
back (up position).
Tonearm
Tonearm lifter lever
o You can also move the tonearm above the record
when the tonearm lifter lever is in the down position.
Slowly lower it to start playback.
7 Move the tonearm to the track where
you want to start playback.
ATTENTION
o Always remove the protective cover (white) before
use. Keep this protective cover to protect the tip of
the stylus during transportation.
o The first song starts at the outer edge of the record.
Lower the stylus to the outer edge of the record if
you want to listen to the first song.
8 Use the tonearm lifter lever to lower the
tonearm.
The tonearm lowers slowly until the stylus touches the
record and playback begins.
o Close the dust cover during playback. Since doing
this prevents skipping caused by unintended contact
and blocks external sound pressure, it makes noise
less likely to occur.
V
Do not place anything on the dust cover.
ATTENTION
o During playback, do not touch the tonearm or the rotating
record. Doing so could damage the stylus tip and cause
scratches on the record.
o Do not forcibly stop platter rotation during playback. Since
this product is not a turntable designed for DJs (direct
drive), doing something like this could cause malfunction.
If the volume is too loud during record playback, vibration
from speakers could be transmitted to the stylus, causing
loud feedback. If this happens, lower the volume of the
amplifier.
When playback finishes
When playback finishes, the tonearm automatically returns to
the tonearm holder and the rotation stops.
To manually interrupt playback, use the tonearm lifter lever to
raise the tonearm and then return the tonearm to its resting
position.
Tonearm
Tonearm lifter lever
Headshell
o The tonearm may not return to the tonearm holder auto-
matically depending on the record. In that case, move the
tonearm back to the tonearm holder manually.
7