Operation Manual

• You can connect up to four pairs of speakers to this receiv-

er and select the various combinations of speakers accord-

ing to your tastes.

• The speakers C and D can be installed in the main room as

the speakers A and B can or in the another room (SUB

ZONE) for SUB ZONE playback. (For details, refer to "SUB

ZONE PLAYBACK" on page 21.)

• Be sure to connect speakers firmly and correctly according

to the channel (left and right) and the polarity (+ and -).

• If the connections are faulty, no sound will be heard from

the speakers, and if the polarity of the speaker connection

is incorrect, the sound will be unnatural and lack bass.

∑Notes :

• For safe amplifier operation, use the speakers with imped-

ance of over 4Ω when you connect a pair terminals of

SPEAKER A or B terminals and a pair terminals of SPEAK-

ER C or D terminals and use the speakers with impedance

of over 8Ω when you connect both SPEAKER A and B ter-

minals or/and both SPEAKER C and D terminals.

• Do not let the bare speaker wires touch each other or any

metal part of this receiver. This could damage this receiver

and/or the speakers.

4. CONNECTING SPEAKERS

5. AC INPUT CORD

• Plug the cord into an wall AC outlet.

6. DC TRIGGER OUT

• When the DC TRIGGER OUT button is pressed, “INPUT”-TRIG ON is displayed for a few minutes, and then 12 V (25mA max)

is output.

• Press the DC TRIGGER OUT button again, “INPUT”-TRIG OFF is displayed for a few minutes, and then output will be dis-

abled.

7. RS-232C

• Used for a wired RS-232C standard remote control unit (optional).