Owner's Manual

IMPORTANT SAFETY INSTRUCTIONS
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
1. READ AND FOLLOW INSTRUCTIONS: All the safety and operation instructions should be read before
the product is operated. Follow all operation instructions within this manual.
2. RETAIN THESE INSTRUCTIONS: The safety and operation instructions should be retained for future
reference.
3. HEED WARNINGS: Comply with all warnings on the product and in the operation instructions.
4. CLEANING: Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or
aerosol cleaners. Use a damp cloth for cleaning.
5. GROUNDING OR POLARIZATION: This product may be equipped with a polarized alternating current
line plug (a plug having one pin wider than the other). This plug will fit into the power outlet only one way.
This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the
plug should still fail to fit, contact your electrician since it is likely you have an out of sate wall socket.
Never force the plug into the socket.
6. OVERLOADING: Do not overload wall outlets or extension cords as this can
result in the risk of fire or electric shock. Overloaded AC outlets, extension cords,
frayed power cables, damaged or cracked wire insulation, and broken plugs are
dangerous. They may result in electric shock or fire hazard. Periodically examine
the power cable - if its appearance indicates damage or deteriorated receptacles
have it replaced by your service technician.
7. POWER SOURCES: This product should be operated only from the type of power source indicated on
the rear panel label. If you are not sure of the type of power supply to your home, consult your product
dealer or local power company. For products intend to be operated from battery power, or other sources,
refer to the operation instructions.
8. ACCESSORIES: Do not place this product on an unstable surface or support. The
product may fall, causing serious injury to a child or adult as well as serious damage to
the product. Any mounting of the product should follow the manufacture’s instructions
and use a mounting accessory recommended by the manufacturer. A product and cart
combination should be moved with care. Quick stops, excessive force, and uneven
surfaces may cause the product and cart combination to overturn.
9. OUTDOOR ANTENNA GROUNDING: If an outside antenna or cable system is connected to the product,
be sure the antenna or cable system is grounded so as to provide some protection against voltage
surges and built-up static charges. The example below is for reference only. Correct grounding should
always be installed by an electrician.
A
NTENNA
LEAD IN
WIRE
A
NTENNA
DISCHARGE UNIT
(NEC SECTION 810-21)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC A RT 250 .PART H )
ELECTRIC
SERVICE
EQUIPMENT
GROUND
CLAMP
10. POWER CABLE PROTECTION: The power supply cables should be routed so that they are not likely to
be walked on or pinched by items placed upon or against them, paying particular attention to cables at
plugs and the point where they exit from the product.
11. ATTACHMENTS: Do not use unauthorized attachments as they may cause faults with the unit.
12. CONDITIONS REQUIREING SERVICE: Unplug this product from the wall outlet and refer servicing to
qualified service personnel under the following conditions:
a) If the unit exhibits sudden unusual operation or unusual display characteristics.
2