Owners Manual

22
Specifications
Analog audio inputs
RCA connectors ......................................... 1 pair (L/R)
Input impedance .......................................... 30 kΩ
Maximum input .......................................... 2 Vrms
3.5mm stereo mini jack* ........................................... 1
Input impedance .......................................... 22 kΩ
Maximum input .......................................... 2 Vrms
Digital audio inputs
COAXIAL digital
RCA connector ................................................. 1
OPTICAL digital
Square (TOSLINK) connector. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Round connector* .............................................. 1
(−24.0 to −14.5dBm peak)
USB-B port. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
(USB 2.0 standard)
PCM data sampling frequency
COAXIAL digital
32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz
OPTICAL digital
32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz
USB ........44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz
352.8 kHz, 384 kHz
Quantization bit depth
COAXIAL digital/OPTICAL digital ........................ 16/24-bit
USB ................................................ 16/24/32-bit
DSD data sampling frequency
COAXIAL digital/OPTICAL digital ......................... 2.8 MHz
(supported using 176.4kHz/24-bit DoP transmission)
USB ................................. 2.8 MHz, 5.6 MHz, 11.2 MHz
*This is a combined analog (LINE 2) and optical (OPT 2) input connector.
Speaker outputs
Maximum output ...................................... 60 W + 60 W
(10% distortion, 1 kHz, 4 Ω)
30 W + 30 W
(10% distortion, 1 kHz, 8 Ω)
Rated output .......................................... 43 W + 43 W
(1% distortion, 1 kHz, 4 Ω)
22 W + 22 W
(1% distortion, 1 kHz, 8 Ω)
Allowable speaker impedance ................................ 4–8 Ω
Total harmonic distortion ............ 0.005% or less (1 kHz, 8 Ω, 1 W)
S/N ratio ............................................ 100 dB or more
(analog input, when 8Ω load, rated output, A-weighted)
Frequency response .....................10 Hz – 100 kHz (+1/−3 dB)
(8 Ω, 1 W, analog input)
PRE OUT audio outputs
RCA connectors ......................................... 1 pair (L/R)
Output impedance ........................................ 150 Ω
Frequency response ................. 10 Hz – 100 kHz (+1/−3 dB)
(analog input, when 200mVrms output)
S/N ratio ........................................ 103 dB or more
(analog input, when 1kHz/2Vrms output, A-weighted)
Total harmonic distortion .......................... 0.005% or less
(analog input, when 1kHz/2Vrms output, 20kHz LPF)
Headphones output
3.5mm 4-pole stereo mini jack .....................................1
Practical maximum output .................. 280 mW + 280 mW
(GAIN set to HIGH, into 32Ω load, distortion 10%)
Compatible impedance range ......................... 16–600 Ω