Owner's Manual
Table Of Contents
- ENGLISH
- FRANÇAIS
- ESPAÑOL
- WARRANTY/GARANTIE/GARANTÍA
EN
17
Specifications
General
Power supply
Model for Europe ........................ AC 220–240V, 50/60Hz
Model for USA/Canada .......................... AC 120V, 60Hz
Power consumption
Models for Europe and USA/Canada ........................ 58W
External dimensions (W × H × D, including protrusions)
290 × 84.5 × 271mm (11 1/2" × 3 3/8" × 10 3/4")
Weight ............................................. 4.4kg (9 3/4lb)
Operating temperature range ....................... +5°C to +35°C
Operating humidity range ............. 5% – 85% (no condensation)
Storage temperature range ......................... −20°C to +55°C
Included accessories
Power cord × 1
Rubber pads × 3
Owner’s manual (this document, including warranty) × 1
o For information about the warranty, users living in the USA and
Canada should see pages50–51 and the back cover (warranty
document). Users living in Europe and other regions should see
page51.
o Design and specifications are subject to change without notice.
o Weight and dimensions are approximate.
o Illustrations in this manual might differ slightly from production
models.
Amplifier
Maximum effective output
STEREO or BI-AMP operation ...................... 170W + 170W
(4Ω, 1kHz, JEITA)
95W + 95W
(8Ω, 1kHz, JEITA)
BTL operation .............................................350W
(8Ω, 1kHz, JEITA)
Rated output
STEREO or BI-AMP operation ...................... 125W + 125W
(4Ω, THD 0.8%, 1kHz)
70W + 70W
(8Ω, THD 0.8%, 1kHz)
BTL operation .............................................230W
(8Ω, THD 0.8%, 1kHz)
Allowable speaker impedance
STEREO or BI-AMP operation .............................. 4–16Ω
BTL operation ............................................ 8–16Ω
Total harmonic distortion .................................. 0.0015%
(8Ω, 1kHz, 12.5W, JEITA)
S/N ratio (input short). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113dB
(8Ω, 1kHz, IHF-A)
Frequency response .................. 10Hz – 50kHz (+0dB, −5dB)
(8Ω, 1kHz, 1W, JEITA)
Input sensitivity
RCA connectors ........................................... 0.66V
(with 8Ω output, THD 1%)
XLR connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.3V
(with 8Ω output, THD 1%)
Input impedance
RCA connectors .................................. 10kΩ or more
XLR connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10kΩ or more