Operation Manual

15
ENGLISH
Up to 64 tracks/files can be programmed in the desired order.
1
Press the PROGRAM button when playback is stopped.
CD
MP3
The MEMORY indicator appears, showing that program mode is
enabled.
< To stop programming, press the STOP button (H).
2
(When programming with an MP3 disc)
Press the Number buttons to select a folder, then press
the PROGRAM button.
< You can also use the SKIP buttons (.//) to select folders.
< MP3 files not located in a specific folder are in the “01” (ROOT)
folder.
3
Press the Number buttons to select a track/file, then
press the PROGRAM button.
The track/file is programmed, and “P-02” is displayed.
< You can also use the SKIP buttons (.//) to select tracks/
files.
< Repeat steps
2
and
3
to program more tracks/files.
< You can program up to 64 tracks/files.
< To stop programming, press the STOP button (H). Programming
is cancelled, but the program contents are retained in memory.
To restart program playback, press the PROGRAM button, and
then press the PLAY/PAUSE button (G/J).
4
When the selection of track/file numbers is completed,
press the PLAY/PAUSE button (
G
/
J
) to start program
playback.
< After program playback finishes, press the PLAY/PAUSE button
(y/J) to play the program again.
< Pressing the POWER button or the OPEN/CLOSE button (L)
causes the program content to be discarded.
< The shuffle function does not work during program playback.
< During program playback, tracks/files cannot be selected using
the Number buttons.
Program Playback (1)