User manual

Repeat mode

< Halting playback stops the repeat mode.

Track repeat

When this is selected, the currently-selected track repeats. If

another track is selected during repeat playback, the newly-

selected track repeats.

Disc repeat

The whole contents of the disc are repeated.

Use the REPEAT button to select the repeat mode for

playback. Repeated presses of the REPEAT button cycle

between the following options:

REPEAT TRK

(track repeat)

REPEAT DSC

(whole disc repeat)

REPEAT OFF

(no repeat)

Display dimming

The display on the main unit can be dimmed to suit the

environment in which you listen to music. There are three

levels and an “off” setting.

Use the FL DIMMER button to cycle between these

settings.

< Note that the OFF setting is not memorized when the power

is turned off. When the unit is switched off with the display

off, and then turned on again, the display is reset to the

minimum brightness.

In OFF mode, when you press a button such as PLAY, the

illuminations turn temporarily on.

Changing the display mode

During playback, it is possible to change the display as shown

here.

Currently playing track Elapsed time of

current track

Time remaining for current track

Time remainin

for the disc

Total elapsed time of the disc