CD Player User Manual

TASCAM CD-RW901 17
4 − Playback operations
The CD-RW901 can be used to play back CDs (includ-
ing CD-R and CD-RW discs that have been recorded
and finalized on other types of recorder), as well as
CD-R discs and CD-RW discs that have been recorded
on the unit.
Audio files in MP3 format on CD-ROM, CD-R and
CD-RW are also playable on the unit.
Simple playback operations
1. Press the POWER switch to turn on the unit.
2. Press the
OPEN/CLOSE key to open the disc tray.
The display shows
Open. Insert a disc in the tray
with the label side up.
3. Press the
OPEN/CLOSE key to close the tray. The
display shows
Close when a disc is loaded into
the unit, then
TOC Reading will appear, with the
period ashing.
When the TOC has been read, the display shows the
number of tracks and total running time of the disc.
Disc type
Total running timeTotal number of tracks
The CD-RW901 also shows one of the following:
TOC A disc finalized
MP3 A disc contains MP3 files
4. Press the PLAY key to start playback.
Adjust the connected monitor system, or the
level control for the
PHONES on the unit to set
the listening level you desire.
WARNING
If you are monitoring using headphones, first adjust
the level control to low on the unit, then connect
to the PHONES jack before playing back. This will
prevent any possible damage to your hearing.
5. To stop playback, press the STOP key.
To temporarily stop playback and enter play
-
back standby mode, press the
READY key. To
resume playback, press the
PLAY key again.
NOTE
The explanation in this manual will assume the user
is starting from the normal Continuous mode.
Track selection
Skipping track numbers backward or forward.
1. Select desired tracks for playback with the
MULTI JOG dial on the front panel. Turning
clockwise skips the track number backward and
counterclockwise skips forward.
Or, press the
SKIP key on the remote control.
Pressing
Â
key skips the track number back
-
ward and
¯
key skips forward.
2. Press the PLAY key to start playback.
Or, press the
READY key to cue the track and
enter playback standby mode after moving to
the head of the selected track. To start playback,
press the
PLAY key.
Using the skip function
Discs for playback
The CD discs in the CD-RW901 can play back the
types of discs listed below.
Commercial pre-recorded CDs recorded in CD-DA
format.
CD-R and CD-RW discs that have been recorded in
CD-DA format and finalized properly.
•
•
MP3 files recorded in ISO9660 level 1 and level
2 format on CD-R and CD-RW discs, and properly
finalized. MP3 files that are recorded to a disc with
Joliet format extensions are also playable.
•