CD Player User Manual

TASCAM CD-RW901 23
When nearing the end of a track or disc, the EOM indica-
tor will light up on the display.
The number of seconds (1 to 99) before the track/disc
end that the indicator is displayed can be set beforehand.
To set the message display time, use the EOM TRK
or EOM DISC options on the PLAY sub-menu (see
“Operation basics” on page 16).
NOTE
This function cannot be used with MP3 playback
mode.
End of disc/track message (EOM)
Call function allows the unit’s playback position to
be returned to the point at which playback last started
from ready mode. If there is no “call point”, an error
message NoCall PT!! will be displayed.
NOTE
This function cannot be used with program, random
and MP3 playback mode.
Call function
This function allows the playing back a single track, and
the automatic cuing of the next track ready for playback.
Combained with Auto Cue function, the unit will enter
playback ready mode at the start of the next track.
Press
AUTO READY key on the front panel or remote
control to set the function on. The A.READY indicator will
light up.
Auto Ready function
When the auto cue function is on, when a track is select-
ed, the point where sound begins (not where the track
begins) on that track is located, and the unit enters play-
back ready mode. Then, when the PLAY key is pressed,
playback begins at exactly that point.
Press
AUTO CUE key on the front panel or remote con-
trol to set the function on. The A.CUE indicator will light
up.
Use the A_CUE LEVEL option to set the sound start
position detection level.
Auto Cue function
When in playback or playback ready mode, if the
ERASE key is pressed, the display shows “RID”
code on the screen. If there is no “RID” code on the
disc or the code has not been recorded on the disc,
Incomplete! will appears on the display.
Recorder Identification Data (RID)
When in playback or playback ready mode, if the
FAINALIZE key is pressed, the display shows “ISRC”
code on the screen. If there is no “ISRC” code on the
disc or the code has not been recorded on the disc,
Incomplete! will appears on the display.
International Standard Recording Code (ISRC)
In this function, when the unit is in playback mode, and
when the
PLAY key is pressed, the unit starts playback
from the beginning of the next track.
Use the Menu option or the
INC PLAY key on the
remote control to set this mode on. The TRACK indicator
will blink during playback or playback ready mode.
When the
STOP key is pressed, the unit will enter play-
back ready mode at the start of the next track.
Incremental playback
4 − Playback operations