Owner manual

ENGLISH

To check the programmed order

In the stop mode, press the PROGRAM button

repeatedly. The track/file number and programme

number will be shown on the display.

To change or add a track/file to the

programme

In the stop mode, press PROGRAM button repeatedly

until the program number for which you want to

change the track/file appears on the display. Then

select a track/file using the scroll buttons (5/b). The

previous track/file is replaced with the newly selected

one.

If you want to add a track/file to the end of the

programme, press the PROGRAM button repeatedly

until “P-END” briefly appears on the display. Then

select a track/file using the scroll buttons (5/b). The

track/file is added to the programme.

To delete a track/file from the

programme

In the stop mode, press the PROGRAM button

repeatedly until the programme number appears

to be deleted on the display, then press the CLEAR

button. The selected track/file is deleted from the

programme.

To clear the programme

1. In the stop mode, press the PROGRAM button.

2. Hold down the CLEAR button for more than 4

seconds.

< In the following cases, the programmed contents will

also be cleared:

pressing the STANDBY/ON button

opening the disc tray

disconnecting the AC power cord

EN_CR-H500NT_T_C.indb 23

09.10.6 5:31:31 PM