User's Manual

ENGLISH
17
A
B
C
A
How to turn the unit on or off
Press the STANDBY/ON switch to turn the unit on or
of
f.
When you use the system control function, set this
switch on, and turn the system on/standby using the
remote control unit.
The Standby/On indicator turns blue when the unit is
turned on.
< When you turn on the system, the source that was
selected last time will start playback automatically.
B
How to select source
Every time the SOURCE button is pressed, the mode is
changed as follows:
TUNER USB/iPod PHONO
CD AUX2 AUX1
Or press the TUNER, iPod/USB, PHONO, AUX 1/2 or CD
button on the remote control unit to select the source
directly.
Basic Operation (1)
C
Adjust the volume
To protect the speakers from a sudden high-volume
sound, gradually turn up the volume to the required
level with the VOLUME knob.
D
Muting
To mute the sound temporarily, press the MUTING
button. To cancel muting, press the MUTING button
again or change the volume setting.
E
Dimmer
Press the DIMMER button to dim the display.
Press the button again to cancel the dimmer function.
< This function will be cancelled when the unit is turned
off.
Standby/On indicator
EN_CR-H500NT_T_C.indb 17EN_CR-H500NT_T_C.indb 17 09.9.24 6:50:48 PM09.9.24 6:50:48 PM