User's Manual

22
Up to 32 tracks/files can be programmed in the desired
order.
1
Press the PROGRAM button in the stop mode.
When CD is selected
P-00 T000
T016 72:00
When USB is selected
P00 T0000
Total File 0130
2
Press the scroll buttons (˙/¥) to select a track/
file.
When CD is selected
P-01 T002
T016 72:00
When USB is selected
P01 T0012
Total File 0130
Programmed Playback
3
Within 5 seconds, press the PROGRAM button.
When CD is selected
P-01 T012
T016 72:00
When USB is selected
P01 T0012
Total File 0130
< Repeat steps
2
and
3
to programme more tracks/
files.
<
If you made a mistake, press the CLEAR button.
The last programmed number will be deleted.
< Up to 32 tracks/files can be programmed. If you
a
ttempt to programme more than 32 tracks/files, “P-
F
ULL (Programme is full)” is displayed and no more
tracks/files can be programmed.
4
When programming has finished, press the
play/pause button (y/J) to start programmed
playback.
When the playback of all the programmed tracks/files
has finished, or if the stop button (H) or the STANDBY/
ON button is pressed, the programme mode will be
cancelled.
< If the unit is disconnected from the power supply, the
programmed contents will be erased.
EN_CR-H500NT_T_C.indb 22EN_CR-H500NT_T_C.indb 22 09.9.24 6:50:52 PM09.9.24 6:50:52 PM