User's Manual

ENGLISH
49
When you adjust the clock manually, follow the following
steps.
<
The clock setting of this unit is automatically adjusted
according to the CLOCK TIME data of an RDS
broadcasting.
1
Press the TIME SET button.
Each time the TIME SET button is pressed, the mode is
changed as follows.
Current Time
On Time
Off Time
Source select
< For Europe, the unit uses the 24-hour “military” clock.
For North America, the unit uses the 12-hour clock.
< When no action is taken for 1 minute, the time adjust
mode will be cancelled.
< Press the stop button (H) to cancel the time setting.
2
Press the scroll buttons (˙/¥) to set the current
hour.
Setting the Clock
3
Press the ENTER button.
The “minute” value blinks.
4
Press the scroll buttons (˙/¥) to set the current
minute.
5
Press the ENTER button.
The clock starts from 00 seconds.
< The clock setting will not be saved when the AC
p
ower cord is pulled out.
EN_CR-H500NT_T_C.indb 49EN_CR-H500NT_T_C.indb 49 09.9.24 6:51:09 PM09.9.24 6:51:09 PM