User's Manual

50
Setting the Timer
< Adjust the clock before setting the timer.
< Select “Direct mode” before using the iPod for the
t
imer; otherwise, the iPod will not be played back
when the On time is reached. See page 29.
<
When no action is taken for 1 minute, the timer setting
mode will be cancelled.
1
Press the TIME SET button repeatedly until “On
time” is displayed.
“On time” appears on the display, and the “hour” value
blinks.
2
Press the scroll buttons (˙/¥) to set the hour
value, and press the ENTER button.
The “minute” value blinks.
3
Press the scroll buttons (˙/¥) to set the minute
value, and press the TIME SET button.
“Off time” appears on the display, and the “hour” value
blinks.
4
Repeat step
2
and
3
to set the Off time.
“Source select” appears on the display.
5
Press the scroll buttons (˙/¥ ) to select the
source, and press the ENTER button.
Now the timer setting is stored in memory.
< When you use iPod touch as the source for the timer,
do
not turn it off. It will not be turned on when the On
time is reached.
EN_CR-H500NT_T_C.indb 50EN_CR-H500NT_T_C.indb 50 09.9.24 6:51:10 PM09.9.24 6:51:10 PM