Radio User Manual

ENGLISH
15
3
Turn on and play your device.
4
Turn the VOLUME knob on the unit (or press Volume+/-
buttons on the remote control) to adjust the system volume.
You may need to adjust your device volume, too.
When using the PHONES jack of your mini player, you must
adjust the volume of the mini player or you may hear no
sound from your HD-1.
• Turning the volume of the mini player up too high may cause
the sound from your HD-1 to be distorted. In this case, reduce
the volume of the mini player until the distortion stops and
then adjust the volume level of the HD-1 to a comfortable
listening level.
LINE Out Operation
You can connect the HD-1 to another line-level device such as
an amplifier or recording device through the LINE OUT Jack
located at the back of the unit.
The volume setting on the HD-1 does not affect the line level.
Adjust volume level using the volume control on the device
you connect to.
If you are using your iPod without a docking port, other MP3
player or other portable audio device, it can still be played on
the HD-1.
1
Connect the PHONES jack (audio output jack) of a portable
audio player to the AUX IN jack of the HD-1 using the
supplied stereo mini plug cable.
2
Select "AUX" using the FUNCTION/WAKE TO button.
Listening to a non-docking iPod or other portable audio devices
FUNCTION
(WAKE TO)
2
4
DEVICE
HD-1.indd 15 2008.12.17 9:19:46 AM