User manual

ENGLISH

Speaker Layouts for Dolby Virtual Speaker

Dolby Virtual Speaker technology virtualizes the missing

speakers; in Wide mode, it virtualizes the necessary speakers and

enhances the surround experience.

There are four speaker layouts for Dolby Virtual Speaker.

Select DOLBY VS REF or DOLBY VS WIDE mode by

pressing the DSP button.

Press the PARAMETER button to change the setting.

Each time the PARAMETER button is pressed, the setting is

changed as follows:

DVS 2SPK (2-Speaker Layout)

Select this when only two speakers (Front L/R) are available.

The missing speakers (Center and Surround L/R) will be

virtualized.

DVS 3SPK (3-Speaker Layout)

Select this when three speakers (Front L/R and Center) are

available.

The missing speakers (Surround L/R) will be virtualized.

DVS 4SPK (4-Speaker Layout)

Select this when four speakers (Front L/R and Surround L/R)

are available.

The missing speaker (Center) will be virtualized.

DVS 5SPK (5-Speaker Layout)

Select this when five speakers (Front L/R, Center and

Surround L/R) are available.

Dolby Virtual Speaker technology enhances the surround

experience.

DVS 4SPK and DVS 5SPK is available for DOLBY VS Wide

mode only.

2SPK (REF) 2SPK (WIDE)

3SPK (REF) 3SPK (WIDE)

4SPK (WIDE)

5SPK (WIDE)

Black: physically existent speakers

White: Virtual speakers

Noir: Enceintes existant physiquement

Blanc: Enceintes virtuelles

Negro: Altavoces físicamente existentes

Blanco: Altavoces virtuales