Instructions

45
ENGLISH
Touch pairing
If the other Bluetooth device supports NFC, you can
pair it with this unit using the following procedures.
1 Press the CD/Bluetooth/USB button to
select “Bluetooth”.
o You cannot use touch pairing if another function
is selected.
2 Hold the antenna of the device that
supports NFC toward the touch pairing
reader.
Do this within two seconds of selecting “Bluetooth”.
The touch pairing reader is on top of the unit near
the record needle resting place. When shipped new
from the factory, it is covered with a sticker.
Touch pairing reader
Device that supports NFC
(smart phone, etc.)
o Hold the device that supports NFC within 2 cm
of the touch pairing reader.
o Be careful not to bump the record needle when
holding the device that supports NFC.
Listening to records
Before using the record player, use a coin or other tool
to turn the transport locking screw clockwise until it
stops. Remove the stylus cover (made of white plastic)
(page 23).
1 Press the PHONO/AUX button to select
“PHONO”.
Z
Each time the PHONO/AUX button is pressed,
PHONO (record) and AUX (external component) are
selected alternatively.
2 Open the turntable cover slowly.
V
Be careful not to pinch your hand, for exam-
ple, when opening and closing the turntable
cover.
Continued on the next page