ENGLISH FRANÇAIS Model MJBTS-1 USER MANUAL ESPAÑOL oo Thank you for purchasing this product. oo Be sure to read this user manual before operating the product and use it correctly. oo Store this manual in a safe place for future reference.
IMPORTANT SAFETY PRECAUTIONS CAUTION oo DO NOT REMOVE THE EXTERNAL CASES OR CABINETS TO EXPOSE THE ELECTRONICS. NO USER SERVICEABLE PARTS ARE WITHIN. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with this manual. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding-type plug.
BBPrecautions concerning batteries Misuse of batteries could cause them to rupture or leak leading to fire, injury or the staining of nearby things. Please read and observe the following precautions carefully. oo Be sure to insert the batteries with correct positive (+) and negative (_) orientations. oo If the remote control is not used for a long time (more than a month), remove the batteries to prevent them from leaking.
For European Customers ENGLISH Disposal of electrical and electronic equipment (a) All electrical and electronic equipment should be disposed of separately from the municipal waste stream via collection facilities designated by the government or local authorities. (b) By disposing of electrical and electronic equipment correctly, you will help save valuable resources and prevent any potential negative effects on human health and the environment.
Wireless equipment precautions Compliance of radio transmitter and interference USA model This device complies with Part.15 of FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause interference 2) This device must accept any interference, including interference that may cause undesired operation of the device.
Bluetooth® notes This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of contents Before use Wireless equipment precautions. . . . . . . . . . . . . . . . . . . . . 6 Bluetooth® notes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Included parts Before use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Names of parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Using the remote control. . . . . . . . . . . . . . . . . . . . . . . . . . .
2 oo Avoid placing the unit in direct sunlight, close to a heater or any other place that might become hot. Furthermore, do not place it on top of an amplifier or other equipment that generates heat. Doing so might result in discoloration or deformation, or cause a malfunction. While continuing to pull the tab toward the AC adaptor plug, insert the concave part (A) of the plug into the convex part (B) on the inside opposite the tab. Then, push it into the other side in the direction of the arrow.
Names of parts Main unit Display MODE button Volume (–/+) buttons Skip (.//) buttons Remote control receiver LED Bluetooth indicator FM antenna Power cord (ON/OFF switch) Dedicated AC adaptor Remote control Power ( ) button Skip (lower frequency) (.
Using the remote control When to replace the battery oo Point the remote control toward the remote control receiver on the main unit and use it from a distance of 5 m or less. Do not place any obstructions between the main unit and the remote control. oo If the remote control receiver is exposed to direct sunlight or strong lighting, the remote control might not work properly.
Installing the wall-mounting plate Q CAUTION oo Before installation of the wall-mounting plate, determine the location while confirming that no radio wave interference occurs with other electronic devices. (See “Radiation Exposure requirements” on page 6.) oo Before installing the wall-mounting plate on a wall, confirm that the wall is strong enough for it. oo Be aware that we will take absolutely no responsibility if an accident occurs because of improper installation.
Attaching the unit Extend the FM antenna. After connecting the power cord to the dedicated AC adaptor cord, plug the adaptor into an outlet. Plug into outlet Unwind and extend the FM antenna attached to the back of the unit. 2 Dedicated AC adaptor Install the unit on the wall-mounting plate. Power cord Align the unit with the wall-mounting plate brackets. Power plug Slide the unit down into place. Align the brackets on the unit with the brackets on the wall-mounting plate and slide it into place.
Listening to audio from a Bluetooth device (1) 1 Pull the power cord down gently to turn the unit on. 3 Pair the unit with or connect it to the other Bluetooth device Pairing with a Bluetooth device oo You can also use the Power ( ) button on the remote control. 2 Press the MODE button. When Bluetooth mode is activated as the source, “BT” appears on the display. BT The first time you use this unit with a new Bluetooth device, you must pair them.
4. When pairing with the MJBTS-1 completes, the devices are connected. Set up on an iPhone with iOS 6 1. Open the Settings app and select “Bluetooth”. 2. Set Bluetooth to ON. “MJBTS-1 Not Paired” appears. oo After pairing completes, “MJBTS-1” becomes a “PAIRED DEVICES” instead of an “AVAILABLE DEVICES”. Continued on the next page 15 ENGLISH 3. When “MJBTS-1” appears in the list of AVAILABLE DEVICES, select it.
Listening to audio from a Bluetooth device (2) 3. Select “MJBTS-1 Not Paired”. When pairing completes, “MJBTS-1 connected” appears. Connecting with an iPhone running iOS 6 1. Open the Settings app and select “Bluetooth”. 2. S et Bluetooth to ON. “MJBTS-1 Not Connected” appears. 3. Select “MJBTS-1 Not Connected” to connect with the MJBTS-1. oo If a request for a passcode appears on the screen of the Bluetooth device, enter “0000” (four zeros).
Select and play an audio file on the Bluetooth device. oo You can also use the remote control Play/Stop (y/9) button. 5 Use the Volume (–/+) buttons or the remote control VOLUME +/– buttons to adjust the volume. VOL 05 Volume level shown Selecting songs Selecting the previous song Press the . button on the main unit or a similar control on the Bluetooth device. oo You can also use the . button on the remote control.
Listening to the radio 1 Manual tuning If you want to tune in a station that cannot be tuned in automatically, press the Skip (.//) buttons repeatedly to set the frequency of the station. Press the MODE button to set the source to FM. )0 )0 When “FM” appears, the frequency is shown. oo You can also use the MODE button on the remote control. 2 oo Each time you press a Skip (.//) button, the frequency will change by 0.1 MHz. Choose a station. oo You can also use the Skip (.
Troubleshooting (1) If it still does not function properly, please contact the retailer where you purchased the unit. General The unit does not work. ee Plug the dedicated AC adaptor into an outlet that is supplying power. ee Check the connection between the power cord and dedicated AC adaptor cord. ee Change the battery in the remote control. There is no sound. ee Adjust the volume. The remote control does not work.
Troubleshooting (2) The sound breaks up. ee Is there a wireless LAN, another Bluetooth device, a microwave oven or anything similar nearby? Use this unit as far as possible from such things. ee Keep this unit and the Bluetooth device as close as possible when using them. Try changing their locations. ee When using a smart phone application for something other than music playback, the sound might break up. If this occurs, do not use applications other than the music playback application.
Specifications General Version. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.0 Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A2DP, AVRCP Codec. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SBC Copy protection. . . . . . . . . . . . . . . . . . . SCMS-T supported* Class . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
130
131
RYOHIN KEIKAKU EUROPE LTD. 8-12 LEEKE STREET, LONDON WC1X 9HT www.muji.eu MUJI U.S.A. LIMITED 250 West 39th Street, Suite 605 New York, NY 10018 www.muji.
