® MP3/WMA/CD Player MP-10 User Manual To ensure the smooth handling of your warranty please write the serial number of your device into the box. In the case of warranty you are expected to send it together with a copy of your invoice to your nearest TEAC sales representative.
• Changes in specifications and features may be made without notice or obligation. • Copyright © 2004-2005, TEAC Corporation. All rights reserved. Edition: March 2005 • Company and product names provided herein are trademarks of their respective companies.
Contents CONTENT OF PACKAGE ............................................................. LOCATION OF CONTROLS ......................................................... POWER SOURCES ....................................................................... Using Nickel-metal-hydride batteries: ............................... Using AC/DC adaptor ........................................................ Using external battery case (supply for some models only) ....................................................
CONTENT OF PACKAGE MP3/WMA/CD player MP-10, adapter, earphone, 2 rechargeable batteries, remote control unit, external batterie pack, manual LOCATION OF CONTROLS 18 | MP-10
1 External battery connection 2 DC input socket 3 Lid open switch 4 "Next" button 5 "Previous" button 6. Play / Pause button 7 Stop button 8 Volume up button Vol + 9 Volume down button Vol 10 Audio out socket 11 Remote control & earphone socket 12 LCD display 13 ESP On / Off andDirectory / file level button (DIR/ESP) 14 Equalizer preset button (EQ) 15.
Remark: To remove the Nickel-metal-hydride batteries from the battery compartment, press the negative pole of the battery downward. The positive pole of the battery will be tilted up and the battery can be taken out easily. PUSH Using AC/DC adaptor Use only DC output between 4.5V and 6.0V with positive pole to the center pin, and make sure that the AC input voltage of the adaptor matches with the domestic supply. Any other adaptor may cause damage to the unit.
If the player is operating by the power source of AC/DC adaptor, while the rechargeable batteries are kept inside the battery compartment, switch off the player by pressing the Stop button. Leave the player idle for about 60 sec., the batteries will be recharged automatically. The recharging will be cut off automatically when the batteries are fully recharged. The LCD shows the recharging status or the cut off status.
Remark: The title of song, artist’s name, and album’s name can be displayed if the MP3 disc is with the ID3 versions V1, V1.1, V2 2.0, or V2 3.0 information. 4. Adjust the volume to the desire level by pressing the “VOL -” or “VOL +” button.
Remarks: A. To enhance power saving at the MP3 and WMA formats, the spinning motor stops when the buffer memory is full. B. The unit will be switched off automatically approx. 60 seconds after the playback is stopped. To disable/resume the buttons functions Slide the HOLD switch to the direction of the arrow and the function of buttons are disabled. To resume the function of buttons, slide the HOLD switch to the opposite direction of the arrow.
To skip at directory level for MP3 and WMA playback only Press the DIR/ESP button once, the “Album SKIP” indicator appears on the display for about two seconds. At this status, press the Next button or Previous button, the skip function is on directory level. Press the DIR/ESP button again to go back to file level. To disable the Electronic Shock Protection (ESP) for CD-DA playback only During playback, the ESP indicator shows on the display and the ESP is in operation.
ADVANCE OPERATIONS (A) During playback, press the MODE button to perform the following functions : Repeat One; Repeat All; Repeat Directory; Introduction Scan; Random; Random Repeat All; Random Repeat Directory; Repeat Off Mode Function Repeat One Repeat the current track Repeat All Repeat all tracks in the disc Repeat Directory Repeat tracks within the same directory Introduction Scan Play 10 seconds of each track in the disc Random Play all tracks in the disc randomly Random Repeat all Repeat
Press the MODE button to confirm and start the programming of the second track. Repeat the above procedures to program the consecutive tracks. After programming, press the Play/Pause button to start the programmed playback. Note: Max. 32 tracks can be programmed. SPECIFICATIONS Support Media: Support Format: Playing Bit-rate: CD, CD-R, CD-RW CD-DA, MP3, WMA MP3: 8 - 384 Kbps, and WMA: up to 192 Kbps ESP Control: Approx. 180 sec. for CD-DA, 480 sec. for MP3 (128 Kbps), and 960 sec.
3. Damage, deterioration or malfunction resulting from: (a) accident, misuse, abuse or neglect; (b) failure to follow instructions supplied with the product; (c) any shipment of the product. Any damage arising of transportation is the liability of the freigth company. Any damage arising of transportation and any implicit and explicit risks are the liability of the freigth company.
65205 Wiesbaden-Erbenheim Germany TEAC Europe GmbH DSPD Bahnstraße 12 Hotline: +49 1805 55 83 79 TEAC Service Center: TEAC Service Centre Europe Hessenring 25 64546 Mörfelden-Walldorf, Germany www.teac.de/rma TEAC Europe GmbH, DSPD: Bahnstraße 12, 65205 Wiesbaden-Erbenheim, Germany Internet: www.teac.
