Operation Manual

English – 8 | MP-115-FM/MP-115
Before Using
Battery Installation
1. Please ensure that the player is switched off.
2. Remove the USB lid.
3. Remove the battery cover on the back of the player by sliding it
in the direction of the arrow as shown on the player.
4. Insert an AAA battery into the battery compartment. Ensure to
insert the battery properly according to the polarity shown in the
battery compartment.
5. Push the battery cover back into the player.
Battery level indication
The approximate power levels of your battery are indicated as
follows:
Full Two-thirds full Half full Low Empty
Connect to a PC and Download Audio Files
To connect the player to the PC for transferring files:
1. Make sure that your computer has been started before you
proceed.
2. Pull off the USB lid.
3. Push the USB connector into a free USB port on your PC.
4. The computer system detects “New hardware” and starts to
install the driver automatically. Wait for the system to finish the
installation.
5. When the “
” icon appears at the right bottom of the PC
screen, double click “My Computer” on the desktop, you see a
removable disk which indicates the player. Just use the remov-
able disk as a regular local disk, copying files from or to it.