Operation Manual

English – 24 | MP-266
6. Click “Start Sync” to transfer the WMA music with DRM to player.
Troubleshooting
If there is no picture displayed after the player is connected to PC
and cannot serve as a storage disc or cannot be powered on after
the battery is fully charged, please refer to the following steps to
update the software of the player.
1. Download the most actual software from the provided CD (if
any) or from the website and run the setup.exe files in the folder
to complete the installation.
2. Long press the button
V–
of the player and then plug in the USB
cable.
3. Implement the updated software installed by step (1) to start
software upgrade and release the
V–
button.
4. The upgrade of software may format the player, so please
backup folders and files stored in the player.
5. If the software upgrade program cannot detect the player,
please unplug the USB cable and repeat step (2) and (3) until the
player is acknowledged and the software upgrade is com-
pleted.